Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
- Gear change box
+ 5-step manual box of a gear change (РКПП)
+ 4-step automatic transmission (АТ)
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Gear change box
Specifications
Manual box of a gear change
| Type |
5-step, synchronised without or with a reducer (5х2) |
| Volume трансмиссионного oils, l |
2 3.5 |
| Transfer relations (in brackets - Turbo models) |
| 1st transfer |
3.545:1 (3.454: 1) |
| 2nd transfer |
2.111:1 (1.947:1) |
| 3rd transfer |
1.448: 1 (1.366:1) |
| 4th transfer |
1.088: 1 (0.972:1) |
| 5th transfer |
0.871: 1 (0.738:1) |
| Reverse gear |
3.333: 1 (3.333:1) |
| Transfer relations |
| The higher |
1.000: 1 |
| The lowest |
1.447: 1 |
The main transfer of a drive of forward wheels
| Type |
Гипоидная |
| The transfer relation |
| Models without a turbo-supercharging with АТ |
4.444: 1 |
| Other models |
4.111: 1 |
| Intermediate transfer of a drive of back wheels |
| Type |
Cylindrical, косозубая |
| The transfer relation |
| Models without a turbo-supercharging |
1.000: 1 |
| Models with a turbo-supercharging |
1.100: 1 |
The main transfer of a drive of back wheels
| Type |
Гипоидная |
| The transfer relation |
| Models without a turbo-supercharging |
4.111: 1 |
| Models with a turbo-supercharging |
4.444: 1 |
Forward differential
| Type of gear wheels |
Conic прямозубые |
| Quantity of gear wheels |
| The lateral |
2 |
| Satellites |
2 |
Interaxal differential (models with a constant full drive)
| Type |
With вязкостной муфтой |
| Type of gear wheels |
Conic прямозубые |
| Quantity of gear wheels |
| The lateral |
2 |
| Satellites |
2 |
Back differential
| Type of gear wheels |
Conic прямозубые |
| Quantity of gear wheels |
| The lateral |
2 |
| Satellites |
2 |
| Oil volume, l |
0.8 |
Adjusting parametres
| Box lengthening |
| Backlash between a lock ring and the ball bearing (20х72х17), mm |
0 0.15 |
Backlash between a lock ring and an internal holder of the bearing of a shaft
Leading gear wheel of intermediate transfer of a drive of back wheels, mm |
0 0.15 |
| Carter of a distributing box in gathering with lengthening |
| Backlash between an adjusting washer of interaxal differential and the persistent bearing, mm |
0.35 0.55 |
| Backlash between a persistent washer (52х61хt) and the bearing, mm |
0.05 0.55 |
| Intermediate gear wheel of a reverse gear |
| Backlash between an intermediate gear wheel and a wall left полукартера transmissions, mm |
6.0 7.5 |
| Backlash between an intermediate gear wheel and an opposite wall картера, mm |
0 0.5 |
Gear change plugs
| Backlashes between tips of rods, mm |
| Tips of rods of switching of 1/2 and 3/4 |
0.5 1.5 |
| Tips of rods of switching 3/4 and 5 |
0.6 1.4 |
Carter РКПП in gathering
| Backlash of gearing of gear wheels of the main transfer, mm |
0.13 0.18 |
| Backlash between a lock ring and a persistent washer of the intermediate block (only boxes with a reducer), mm |
0.05 0.35 |
Leading gear wheel of the main transfer
The resistance moment проворачиванию the leader
Gear wheels in a secondary shaft, Nanometer |
0.3 0.8 |
Leading gear wheel of a divider of transfers (only boxes with a reducer)
| Backlash between the bearing and half rings, mm |
0 0.08 |
Backlash between the bearing and lock
Ring in external diameter of 56 mm, mm |
0 0.08 |
Primary shaft (only boxes with a reducer)
Backlash between a synchronizer nave
рудктора, mm |
0.060 0.100 |
Interaxal differential (models with a constant full drive)
| Backlash between a lock ring in external diameter of 110 mm and a differential cover, mm |
0 0.15 |
| Axial люфт вязкостной муфты, mm |
0.62 0.86 |
Forward interaxal differential
| Backlash between teeths of lateral gear wheels and satellites, mm |
0.13 0.18 |
| Backlash between шлицевыми shaft of a drive of semiaxes and an axis of satellites, mm |
0 0.2 |
Efforts of a tightening of carving connections, Nanometer
Coupling, трансмиссионная a line see the Head.
Automatic transmission
The hydrotransformer
| Type |
Symmetric, 3-element,
With blocking муфтой |
Transformation factor at
The stopped turbine wheel |
2.3 2.4 |
| Diameter, mm |
246 |
Frequency of rotation of the engine at the stopped
Turbine wheel, rpm |
2700 |
| Type муфт a free wheeling |
With crackers |
Transmission
| Type |
Planetary, 2-rjadnaja, with realisation
4 forward transfers and one back |
Elements
Managements |
4 blocking муфты,
1 disk brake,
1 tape brake,
2 муфты a free wheeling |
| Transfer relations |
| 1st transfer |
2.785: 1 |
| 2nd transfer |
1.545: 1 |
| 3rd transfer |
1.000: 1 |
| 4th transfer |
0.694: 1 |
| Reverse gear |
2.272: 1 |
| Control system type |
The hydraulic |
The oil pump
| Type |
Лопастный, variable productivity |
| Type |
ATF DEXRON II |
| Drive |
From the engine |
| Quantity of shovels |
9 |
Control system
| Type |
The electrohydraulic |
| Type |
ATF DEXRON II |
| Volume ATF, l |
8.3 |
| Greasing system |
| Type |
The compulsory |
| Oil type |
Трансмиссионное |
Муфта inclusions of a back drive
| Type |
Multidisk, blocking |
| Control system |
The electrohydraulic |
| Greasing |
The general with a transmission |
| The transfer relation |
1.000: 1 |
The main transfer
| The transfer relation |
| Models with a turbo-supercharging |
4.111: 1 |
| Models without a turbo-supercharging |
4.444: 1 |
| Oil type |
API, GL-5 |
| Oil volume, l |
| Forward drive |
1.2 |
| Back drive |
0.8 |
| Check of serviceability of functioning of transmission on the motionless car |
| Rating value of turns of the engine during check in mines |
2300 2700 |
Efforts of a tightening of carving connections, Nanometer
| Bolts of fastening of a beam to the car bottom |
54 83 |
| Bolts of fastening of a beam to transmission |
31 39 |
| Bolts of fastening of the central section of system of release of the fulfilled gases to an arm подвеса |
32 40 |
| Bolts of fastening of the central section of system of release to the back |
13 23 |
| Bolts of fastening assembly скобы the basic bearing |
47 57 |
| Bolts of fastening of an arm of a support of a suspension bracket of the power unit |
36 67 |
| Bolts of fastening of a support of a suspension bracket of the power unit to a car body |
36 67 |
| Bolts of fastening of a reception pipe of system of release of the fulfilled gases to the engine |
25 35 |
| Bolts of fastening of section of system of release of the fulfilled gases to глушитлею |
39 57 |
| Bolts of fastening of the bottom spherical support |
39 59 |
| Bolts of fastening of the bottom levers of a suspension bracket to a beam |
83 113 |
| Fastening bolts карданного a shaft to a back connecting flange |
23 39 |
| Bolts of fastening of a basic arm drive a cable of switching АТ |
23 42 |
| Bolts of fastening of assembly collars of a bar of the stabilizer of cross-section stability |
21 29 |
| Bolt and nut of fastening of a starter |
36 44 |
Bolts of fastening of the converter of rotation
To a power shaft |
23 27 |
| Fastening bolts торсионной bars |
| From outside the engine |
44 54 |
| From outside bodies |
47 67 |
| Bolts of fastening of a jet rack |
42 62 |
Bolts of fastening of an arm of a support
Transmission suspension brackets to a body |
36 67 |
| Bolts of fastening of transmission to the engine |
46 54 |
Bolts of fastening of cross-section draught
To a suspension bracket beam |
73 94 |
|
|
