Subaru Forester

1997-2005 of release

Repair and car operation

Routine maintenance

Specifications

Recommended greasings and liquids

Greasings and the liquids recommended to application by the company-manufacturer of cars at the moment of drawing up of the present Management are more low listed. Fresher information can be received on firm car repair shops of company Subaru.

Card вязкостей impellent and трансмиссионных oils

Type and properties of working liquids

Fuel

Models with catalytic The converter	Neetilirovannyj gasoline with OCTANESым number not more low 95 (PETROL)
Models without каталитического The converter	Gasoline with OCTANESым number not more low 90 (PETROL)
Liquid glass - and headlight wipers:	Special cold-resistant liquid in displace with water (50 % of a liquid - frost resistance to-20 )
The impellent Oil	Universal engine oil for petrol engines of class SH or SJ on API, with marks Energy Conserving II (power saving up II), or A2-96 (ACEA). Viscosity 5W/30 for a frigid climate, 10W/40 (10W/30) for a temperate climate and 20W/50 - for roast
Cooling liquid	(50 70) % an antifreeze solution on base этиленгликоля with water
Brake liquid	DOT 3 or DOT 4
Hydraulic liquid of coupling	DOT 3 or DOT 4
System liquid Wheel hydrostrengthenings	ATF DEXRON II or DEXRON III
Трансмиссионная Liquid for АТ	ATF DEXRON II or DEXRON III

Card вязкостей impellent and трансмиссионных oils

Transmissionnoe oil for РКПП	Transmissionnoe oil API GL-5 with viscosity SAE 75W/90
Oil for a distributing box	Transmissionnoe oil API GL-5 with viscosity SAE 75W/90
Oil for differential
Forward differential	Гипоидное трансмиссионное oil API GL-5 with viscosity SAE 80W/90
Back differential	Гипоидное трансмиссионное Oil API GL-5 with viscosity SAE 75W/90
Greasing for the chassis	Litievaja greasing NGLI No 2
Coolant of the conditioner of air	R134a
Compressor oil of the conditioner of air
Models with a link sided steering	DH PR
Models with a right-hand steering	ZXL 200 PG

Volumes of working liquids, л*

Fuel tank	60
Impellent oil (including the oil filter)
Engines of 2.0 l
Models without a turbo-supercharging	4.0
Models with a turbo-supercharging	4.5
Engines of 2.5 l
Models with РКПП	4.0
Models with АТ	4.2
System of cooling of the engine
Engines of 2.0 l
Models with РКПП	6.4
Models with АТ	6.3
Engines of 2.5 l	6.2
Transmissionnoe oil for РКПП	(To merge and fill)
Engines of 2.0 l
Models without a turbo-supercharging	4.0
Models with a turbo-supercharging	4.4
Engines of 2.5 l	3.5
Transmissionnaja liquid for АТ	(To merge and fill)
Engines of 2.0 l
Models without a turbo-supercharging	8.4
Engines of 2.5 l	9.3
Oil for distributing a box (To merge and fill)	Data are absent
Differential
Engines of 2.0 l
Forward differential	Data are absent
Back differential	0.8
Engines of 2.5 l
Forward differential (АТ)	1.2
Back differential	0.8
Liquid ГУР
All models	0.7
Coolant of the conditioner of air, г
Models with a link sided steering	550-650
Models with a right-hand steering	650-750
* All volumes are resulted only approximately. At updating be verified with уровневыми labels.

The engine

The scheme of an arrangement of cylinders

Idling turns, in mines
Models without a turbo-supercharging
Models with РКПП	650 100
Models with АТ	670 100
Models with a turbo-supercharging	700 100
The maximum admissible concentration WITH in the fulfilled gases at oil temperature 80С, %
On single turns	0.5
On turns 2500 2800 in mines	0.3
Level of the maintenance of hydrocarbons on Single turns, particles on one million	100
The maximum admissible concentration СО2 In the fulfilled gases, %	14.5 16.0
The maximum admissible concentration О2 In the fulfilled gases, %	0.1 0.5
Value l on the raised Turns 2500-2800 in mines	0.98 1.02
Klapannye backlashes (on the cold engine), mm
Inlet valves	0.20 0.02
Final valves	0.25 0.02

Ignition system

Type of spark plugs

Engines of 2.0 l
Models without a turbo-supercharging
The models equipped catalytic The converter	Champion RC10YC4 (An interelectrode backlash 1.0 1.1 mm)/RC9YCC, (a backlash of 0.8 mm)
Models without каталитического The converter	NGK BKR6E-11 (a backlash of 0.8 mm)
Autolite:	APP3923, (a backlash of 1.0 mm)
Bosch:	FR8DCX, (a backlash of 1.1 mm)
Beru:	UXF790, (a backlash of 1.1 mm)
Models with a turbo-supercharging	NGK PFR6B, (A backlash 0.7 0.8 mm)
Champion	RC 8PYP, (a backlash of 0.8 mm)
Engines of 2.5 l
Models without a turbo-supercharging	RC10YP4A (Champion)
Models with a turbo-supercharging	PFR5B-11 (NGK)

Type of the coil of ignition

Models without a turbo-supercharging Hitachi CM12-100B

Models with a turbo-supercharging Diamond F-569-01R

Resistance of a primary winding of the coil of ignition, Ohm

Models without a turbo-supercharging 0.63-0.77

Models with a turbo-supercharging 0.62-0.76

Resistance of a secondary winding of the coil of ignition, clod

Models without a turbo-supercharging 10.4-15.6

Models with a turbo-supercharging 18.9-24.15

Base corner of an advancing of ignition, hailstones before ВМТ (it is not regulated, set ECU)

Models without a turbo-supercharging 10 10, at 650 rpm
(At 670 rpm on models with АТ)

Models with a turbo-supercharging 12 10, at 700 rpm

Brake system

The minimum thickness of ventilated brake disks, mm
All models
Brake mechanisms of forward wheels	22.0
Brake mechanisms of back wheels	8.5
Limiting admissible size of lateral palpation of disks, mm
All models
Brake mechanisms of forward wheels	0.075
Brake mechanisms of back wheels	0.10
The minimum admissible thickness of frictional overlays колодок disk brake mechanisms, mm
L models 2.0 (without a metal substrate)	1.5
L models 2.5 (taking into account a metal substrate)	7.5
The maximum admissible diameter of brake drums, mm
All models	230.6
The minimum admissible thickness of frictional overlays of boots of drum-type brake mechanisms, mm
All models	1.5
Size of a free wheeling of a pedal Foot brake, mm	1.0 3.0
The minimum admissible height of position of the squeezed out pedal of a foot brake, mm
Models with a link sided steering	65
Models with a right-hand steering	85
Course of the lever of a lay brake
All models	7-8 clicks

Coupling

Size of a free wheeling of a pedal of a foot brake, mm

1.0 3.0

Efforts of a tightening of carving connections, Nanometer

Drain stopper of the pallet картера the engine	44
Pallet bolts картера АТ	5
Spark plugs	21
Nuts of fastening of wheels	78 98