Check of level of greasing of back differential (each 12 000 km of run or time in 6 months) Check of level of greasing of back differential (a stopper with шестигранной a head)
1 — the Jellied/control stopper (34 Nanometers)
2 — the Drain stopper (34 Nanometers)
3 — the Jellied/control stopper 4 — the Drain stopper 5 — oil Level
Check of level of greasing of back differential (a stopper with 4-coal deepening under прутковый a key)
1 — the Jellied/control stopper (39-59 Nanometers)
2 — the Drain stopper (39-59 Nanometers)
3 — the Jellied/control stopper 4 — the Drain stopper 5 — oil Level
PERFORMANCE ORDER
1. Greasing level in differential should reach the bottom cut of a control/jellied aperture. For check enter into an aperture a finger.
The differential is equipped by two stoppers: jellied/control and drain. Stoppers can have various execution: in one case they are equipped шестигранной by a head under накидной a key, in other - tetrahedral deepening under прутковый a key - pay attention to distinction in efforts of a tightening of stoppers.
2. In case of need make corresponding updating, having added demanded quantity of oil through a jellied aperture, - take advantage of a funnel or the manual pump. 3. Track reliability of a tightening of a stopper.