1. Replacement of a filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the filter condition should be checked often enough, in particular in the conditions of strongly dusty district.
2. On models without a turbo-supercharging the air cleaner is fixed in a back part of an impellent compartment, on models with a turbo-supercharging - in right (schemes of placing of components in an impellent compartment in the beginning of the present Chapter Section the General data on options and adjustments see). |
| 3. Give a fixing bolt/release spring clamps of fastening of a cover of an air cleaner. Disconnect all procedures stirring to performance hoses and uncover, - try not to admit falling in an air cleaner of extraneous subjects. |
|
| 4. Take filtering element and wipe internal walls of a casing pure rags. |
|
5. Visually estimate a condition of a filtering element, in case of strong pollution make replacement. Filter moderately hammered by a dust it is possible to blow compressed air (through a back surface).
|
|
At use of compressed air necessarily put on goggles! The filtering element made of a wax paper cannot be washed out with application of oils or solvents if to achieve satisfactory result by a purge it is not possible, make replacement. |
|
|
In order to avoid premature deterioration of internal components of the engine and occurrence of flashes in a final path do not maintain the car with the taken air filter! |
6. Establish a replaceable filtering element, track correctness of its landing in a casing.
7. Plant into place a cover and fix its spring clamps. |
