1. Make on the car short (in about 15 minutes) a trip for an oil warming up in differential. Поддомкратьте the car also establish it on props.
2. Get under differential drain capacity of suitable volume.
3. Turn out a drain stopper from the bottom part картера differential and merge oil in the prepared container.
4. After вытекание oils will stop, feel a stopper on presence подлипших to it of metal sawdust, then wipe it, screw into place and strongly tighten.
|
|
Presence on a stopper of sawdust testifies to deterioration of internal components of the assemblage which condition should be checked up at the first possibility. |
5. Turn out from картера boxes a jellied/control stopper (the Section Check of level of greasing of back differential see). And by means of the manual pump, a syringe or a funnel fill in differential necessary quantity of fresh oil of a demanded grade, - oil level should reach the bottom cut of an aperture.
6. Screw a stopper into place and strongly tighten. Lower the car on the earth.
7. Make on the car a short trip after which once again check up greasing level in differential. |
|
