Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
- Routine maintenance
The schedule of routine maintenance of cars Subaru Forester
The general information
The general data on options and adjustments
Check of levels of liquids
Check of a condition of tyres and pressure of their rating
Level check трансмиссионного oils РКПП
Check of level ATF and liquids of forward differential of automatic transmission
Check of level of a liquid of the hydraulic booster of a wheel
Replacement of impellent oil and the oil filter
Check, service and gymnastics of the storage battery
Check of a condition of components of system of cooling
Check of a condition and replacement of the hoses located in an impellent compartment
Check of a condition and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of release of the fulfilled gases
Check of level of greasing in a distributing box of all-wheel drive models
Check of level of greasing of back differential
Check of a condition of seat belts
Check and adjustment of turns and structure of a mix of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of operated ventilation картера (PCV) (at a corresponding complete set of the car)
Replacement of a filtering element of an air cleaner
Condition check, adjustment of effort of a tension and replacement drivers belts
Check of a condition of components of the power supply system
Check of brake system
Adjustment of pedals of a foot brake and coupling
Check of a condition and replacement of spark plugs
Check of a condition and replacement of components of system of ignition
Service of system of cooling (опорожнение, washing and refuelling)
Replacement ATF of automatic transmission
Replacement трансмиссионного oils РКПП
Replacement of greasing of a distributing box (all-wheel drive models)
Replacement of greasing of differential
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system recycling the fulfilled gases (EGR)
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check of a condition and replacement of brushes of screen wipers
Check of a condition and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
The condition of assemblages of cleaners of a windscreen should be checked regularly according to the schedule of routine maintenance of the car. Brushes look round on presence of mechanical damages, signs of easing of fastening of components and deterioration of rubber working elements.
On working surfaces of brushes the road film that leads to appreciable decrease in efficiency of functioning of screen wipers in due course accumulates. Regularly wash out brushes a cleaning solution of average concentration.
In the course of functioning of screen wipers can occur gradual spontaneous отдавание fixture of levers, reliability of landing and which tightening also should be checked regularly.
At revealing of cracks or signs of deterioration of rubber working elements their replacement is made.
|
|
| 1. Take away the lever of a screen wiper from glass. Wring out a lock uvula, lower a brush downwards on the lever, liberate from a hook and remove. |
|
| 2. Grasp fingers the end of a working element of a brush and, strongly having pulled, liberate metal loose leaves from directing frameworks. |
|
| 3. Prepare for installation a replaceable rubber element, - in case of need transfer on it metal loose leaves from an old brush. | |
|
|
|
|
Accurately fill a working element in directing frameworks of a brush. Make sure of reliability of fixing of an element in a framework. |
Operating as it should be the return to an order of dismantle of assemblage, establish a brush on the screen wiper lever. Track reliability of fixing of a brush on the lever. |
|
