| 1. Replacement ATF should be made on a regular basis, according to the schedule of routine maintenance of the car (see Has undressed the Schedule of routine maintenance of cars Subaru Forester). As трансмиссионная the liquid remains hot still long time after trip end before to start procedure performance, wait full cooling of the engine (3 4 hours).
2. Prepare fresh трансмиссионную a liquid of a corresponding grade (Specifications in the beginning of the Head see).
3. Number of other necessary performance for forthcoming procedure of tools and materials concern: тележечный a jack, props for car fixing in the lifted position, drain capacity in volume not less than 9 l and a stock of rags and old newspapers.
4. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided an easy approach to a drain stopper of the pallet картера transmissions.
5. At a corresponding complete set of the car remove protection картера transmissions, then turn out located on pallet perimetre fixing bolts.
6. Get under the pallet drain capacity and all necessary stock. Try not to touch to located under with the car bottom разогретым to components of the power unit and system of release of the fulfilled gases. Having placed properly reception container, turn out a drain stopper. When вытекание liquids completely will stop, wipe a drain stopper, screw it on the regular place and tighten with demanded effort (25 Nanometers), - do not forget to replace a sealing washer.
7. Refuelling fresh ATF is made through a control/jellied aperture in which stopper it is built in measuring probe (see Section Check of level ATF and liquids of forward differential of automatic transmission).
8. Having filled in a liquid, translate transmission in position “Р”, cock a lay brake and start the engine.
9. Serially translate selector AT lever through all positions, in summary having returned it in position “Р”. Check up level ATF, in case of need make corresponding updating, having finished level of a liquid to a correct mark in an edge measuring probeа.
10. Within first several days of operation of the car look under the car, checking transmission on presence of signs of development of leaks. Once again check up level ATF, in case of need make updating. |
