| 1. Unlike the steering mechanism of usual type, in equipped the hydraulic booster реечной to transfer uses a working liquid which starts to require eventually replacement. |
2. On the majority of models the tank of hydraulic liquid ГУР is fixed directly on the case of the steering pump in a forward part of the power unit and equipped by a demountable cover.
|
|
3. For check of level of a hydraulic liquid it is necessary to establish forward wheels of the car in rectilinear position and to muffle the engine.
4. In order to avoid dirt hit in hydraulic system wipe a cover and a surface of the tank pure rags.
5. Having turned to the right or to the left, remove from the tank equipped measuring probeом a cover. To the touch estimate temperature moistening an edge probeа liquids. |
| 6. Carefully wipe an edge probeа pure неворсящейся rags, screw a cover into place, then again remove it and on probeу visually define liquid level. The liquid of system of hydrostrengthening of a wheel, also as well as ATF has high factor of thermal expansion, therefore on an edge probeа is put two measuring scales. If a liquid cold to the touch, indications act in film on a scale marked with inscription COLD, if hot, on a scale of NOTES. Try not to suppose an exit of level of liquid ГУР for limits of the bottom border of an admissible range. |
|
7. If necessary the liquid is added directly in the tank through a mouth of the last by means of a funnel. Use only a hydraulic liquid of the recommended grade (Specifications see).
8. If necessity for updating of level of a liquid arises regularly and often, check up on presence of signs of leaks the steering pump, картер реечной transfers, and also all connecting lines of a hydraulic path of system GUR and them штуцерные sockets. |
