Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
- The maintenance instruction
   Access, protection
   Seats and safety devices
   Instrumentations and controls
   Comfort
   Operation receptions
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
3df4be34


Comfort

Systems of heating, ventilation and air conditioning

At correct use of possibilities of systems of heating and ventilation in car salon comfortable conditions of stay are provided and is excluded запотевание glasses.

If the car at purchase has not been equipped by air central air, it can be mounted and established during any time convenient for the owner, at any time establish this system on the car, - address on company Subaru car repair shop.

On the models equipped with system K/V usually it is established салонный the filter providing preliminary clearing of external air submitted in the car. The filtering element is established under the lattice located ahead of a windscreen обтекателя, made of viscose, to procleaning is not subject and in case of pollution owes to replacement. In normal service conditions of the car replacement салонного the filter should be made annually, or through each 12 000 km of run.

The detailed information on use and service of systems of heating and an air conditioning is stated in Sections System of heating and salon ventilation - the general information and Check of serviceability of functioning and service of systems of heating and an air conditioning of the Head of System of cooling, heating of the present Management.

Audiosystem

The general information

The audiosystem entering into a standard complete set provides cleanliness of sounding in all ranges of frequencies, differs simplicity of deenergizing of favourite radio stations by means of keys of preliminary adjustment, allows to listen to audiocassettes and provides possibility of management with listening of records from the compact discs charged in shop built in, or external CD-changer.

Cassette a deck it is supplied by system шумоподавления Dolby, automatic definition of installation chrome-dioksidnoj of a magnetic tape and the function of an automatic reversion providing possibility of continuous reproduction of records from both paths of a tape without reinstallation of an audiocassette.

The used system Dolby made under licence Dolby Laboratories Licensing Corporation. “Dolby”, and also the pictogramme in the form of two stylised letters D are the registered trade marks of company Dolby Laboratories Licensing Corporation.

Management of audiosystem functioning is made from the forward panel of a radio tape recorder. The control panel can have one of four types of execution: And, In, With and D (the Section the Audiosystem - the general information of the Head the Onboard electric equipment see). In the same place the description pasted on glass of the car of the aerial of a radio receiver is resulted.

Rules of use of each of three types of audiosystems are more low stated.

Audiosystem of type And

Audiosystem use in a radio receiver mode

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver


1 — the Button of transition to an ultrashort-wave range (FМ)
2 — the transition Button on средневолновый a range (АМ)
3 — the Button of inclusion of a mode of automatic adjustment of the tuner (SCAN)
4 — the transition Button in a mode of adjustment of a timbre of sounding (BAS/TRE)

5 — the transition Button in a mode of balancing of level of reproduction between loudspeakers (BAL/FAD)
6 — the Switch of a food/regulator of loudness of sounding/adjustment of a timbre and balancing of loudness of reproduction (PWR/VOL)
7 — Buttons of a choice of the fixed channels
8 — the Handle of adjustment of the tuner


Inclusion of a food/volume control of sounding (PWR/VOL)

At regular connection the audiosystem functions, when the ignition key is in position ACC (1) or ON (2). In the first position of a key a food of auxiliary consumers of the electric power joins, in the second - ignition and a food of all consumers of the electric power is included.

Audiosystem inclusion is made by нажимания on push-button handle PWR/VOL (6). Rotation of the same handle in a reproduction mode allows to carry out reproduction volume control.

At inclusion of external lighting devices brightness of illumination of the display of a radio receiver can decrease, - for return to normal brightness drown button PWR/VOL keep its pressed during nearby 2 seconds.

The same handle makes adjustments of a timbre of sounding and balance of loudness of reproduction at a choice of corresponding modes (see more low). The order of use of a regulator is described in the table.

The chosen mode

Indication on the display

Rotation counter-clockwise

Rotation clockwise

Adjustment of a timbre of sounding in a low-frequency range BASS Level easing Level increase
Adjustment of a timbre of sounding in a high-frequency range TRE Level easing Level increase
Balancing of level of reproduction between the right and left loudspeakers BAL Displacement to the left Displacement to the right
Balancing of level of reproduction between forward and back loudspeakers FAD Displacement back Displacement forward
Reproduction volume control VOL More silently More loudly

Adjustment of a timbre of sounding (BAS/TRE)

Transition in modes of adjustment of a timbre of sounding of low and high frequencies/returns in a mode регулриовки loudness is made by consecutive pressing push-button switch VAS/TRE (4). The mode chosen by the current moment is displayed on the screen of the display in the form of a corresponding inscription (“BAS” or “TRE”). Adjustment is carried out by means of the handle (6).

At non-use within more than 5 seconds the system automatically comes back in a mode of volume control of reproduction (VOL).


Balancing of levels of reproduction between loudspeakers (BAL/FAD)

Transition in modes of balancing of level of reproduction between the right/left and forward/back loudspeakers/returns in a volume control mode is made by consecutive pressing push-button switch BAL/FAD (5). The mode chosen by the current moment is displayed on the screen of the display in the form of a corresponding inscription (“BAL” or “TRE”). Adjustment is carried out by means of the handle (6).

At non-use within more than 5 seconds the system automatically comes back in a mode of volume control of reproduction (VOL).


Radio receiver adjustment

Switching of ranges of accepted radio frequencies is made by means of buttons FM and АМ on the control panel of a radio receiver (1) and (2). Tuner characteristics allow to carry out reception in средневолновом a range (MW) in a mode of peak modulation (АМ) and two ultrashort-wave ranges (UKW1 and UKW2) in a mode of frequency modulation (FM).

In a mode of frequency modulation (FM) possibility of reproduction of a stereoannouncement is provided, - on the display screen the inscription “ST” will be highlighted.

In each of three listed ranges (UKW1/UKW2/MW) the system allows to make adjustment by three possible ways: manually (TUNE), automatically (SCAN), and options for preliminary chosen radio stations, which frequencies are brought in memory of the tuner.

Manual adjustment (function TUNE) is made by a deviation in the corresponding party of handle TUNE (8). For change of frequency of reception of the tuner towards increase quickly wring out the handle to the right, towards reduction - to the left.

Transition is carried out with step 9 кГц in средневолновом a range and 0.1 MHz in an ultrashort-wave range. Keeping of the handle turned within more than 1 second leads to tuner machine translation on reproduction of the nearest active station from a corresponding range of frequencies.


Manual adjustment of a radio receiver

— Viewing of a range towards increase of frequencies
— Viewing of a range towards fall of frequencies
— Search of the nearest active station towards increase of frequencies
— Search of the nearest active station towards fall of frequencies

 


Transition in a mode of automatic adjustment is made by means of button SCAN (3). In the given mode the tuner carries out viewing of all chosen range of frequencies from below upwards. At hit the receiver for 5 seconds is switched to active radio station in a reproduction mode, then if the choice is not confirmed by repeated pressing of button SCAN, again will pass to scanning.

Signal easing, and also presence nearby natural barriers (mountain, high-rise buildings, etc.) can lead to infringement of serviceability of functioning of the tuner in a mode of automatic adjustment.

Adjustment of a radio receiver for preliminary chosen stations. By means of six numbered buttons (7) in memory of a radio receiver frequencies of favourite radio stations can be brought. Each button allows to program one frequency in средневолновом a range (АМ) and two frequencies in range FM (on one in each of ranges UKW1 and UKW2). To program memory of a radio receiver, execute following operations:

    a) By means of buttons AM/FM choose a demanded range of radio frequencies (MW or UKW1/UKW2);
    b) By means of TUNE/button SCAN handle adjust a radio receiver on desirable radio station;
    c) Choose for the given radio station one of six buttons of programming of memory, press and keep it until will hear a short sound signal;
    d) Repeat operations with the first on the third to bring in memory of a radio receiver of frequency of six radio stations;
    e) Now it is enough to press any of six buttons of programming of memory of a radio receiver that it was automatically adjusted on preliminary chosen station which frequency of a signal is brought in a corresponding cell of memory of the tuner.

For inclusion of reception of the fixed channel in the chosen frequency range press on corresponding of buttons (7), - on the display screen channel number will be highlighted.

Frequencies of preliminary options of a radio receiver are erased from memory at failure (the strong category) or switching-off of the storage battery, and also at extraction of a safety lock of an audiosystem!


Audiosystem use in a tape recorder mode

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of the tape recorder

9 — the Button of repetition of reproduction (RPT)
10 — the Button of extraction of an audiocassette
11 — Kassetopriemnik
12 — the transition Button in a mode of reproduction of a magnetic recording (TAPE)
13 — the Button of ignoring of admissions in record/search of the beginning of the name (TPS)

14 — the Button of inclusion of a mode of suppression of noise Dolby-NR
15 — the Button of rewind of a film forward (FF)
16 — the Button of compulsory inclusion of a backspacing (PROG)
17 — the Button of rewind of a film back (REW)

Management of the general options of a timbre and loudness of reproduction is made the same as and in a radio receiver mode.

Make sure of density of winding of a tape on cartridge coils. Insert the cartridge in кассетоприемник, - record reproduction will begin automatically even if the radio receiver or the CD player earlier have been included. Besides, the mode of reproduction of record from a magnetic tape already inserted in кассетоприемник cartridges can be included by means of button TAPE (12).

At listening of the films which have been written down with application of system шумоподавления Dolby (with mark NR) the system of suppression of noise can be activated by means of the button (14), - on the display screen the pictogramme in the form of two stylised letters D (company Dolby brand) will be highlighted. System switching-off шумоподавления is made by repeated pressing the same button.

The used system Dolby made under licence Dolby Laboratories Licensing Corporation. “Dolby”, and also the pictogramme in the form of two stylised letters D are the registered trade marks of company Dolby Laboratories Licensing Corporation.

The design decks provides automatic fine tuning of magnetic characteristics звукоснимающей heads at use of films of type METAL/Fe and CrO2.

Choice of a direction of listening of a magnetic tape

Switching of a direction of listening (path) of a magnetic tape is carried out by means of button PROG (16). The current direction прокручивания films is displayed on the display screen, thus the pictogramme corresponds to reproduction of the top path of a film, - bottom.

Automatic switching of a direction of reproduction (automatic reversion) occurs also at the film termination.


The accelerated rewind of a magnetic tape


Film rewind in a corresponding direction is made by means of buttons FF (forward) (15) and REW (back) (17) control panels of a radio tape recorder, - on the display the corresponding inscription will be highlighted. The rewind stop can be made by pressing button TAPE or repeated pressing button FF/REW.

Repetition of reproduction of the chosen fragment

The stereoradio tape recorder control panel, - the elements used in a mode of the tape recorder

9 — the Button of repetition of reproduction (RPT)
10 — the Button of extraction of an audiocassette
11 — Kassetopriemnik
12 — the transition Button in a mode of reproduction of a magnetic recording (TAPE)
13 — the Button of ignoring of admissions in record/search of the beginning of the name (TPS)

14 — the Button of inclusion of a mode of suppression of noise Dolby-NR
15 — the Button of rewind of a film forward (FF)
16 — the Button of compulsory inclusion of a backspacing (PROG)
17 — the Button of rewind of a film back (REW)


Repetition of reproduction of the pleasant fragment of a magnetic recording can be made by means of button RPT (9), - on the display screen the corresponding message will be highlighted. For cancellation of a mode of repetition once again press button RPT.

Mode of ignoring of admissions / search of the beginning of a music record

At нажимании on the button (13) TPS the tape recorder will ignore more than 15-second admissions in record, automatically passing to reproduction of the next thing even if it is written down on other path of a film, - on the display screen the corresponding inscription will be displayed. Mode switching-off is made by repeated pressing of button TPS.

Нажимание on buttons FF and REW in mode TPS leads to automatic transition in the beginning flowing (REW) / following (FF) to record on films.

For uninterrupted functioning of function TPS of a pause between records on a film should make not less than 4 seconds and to be free from noise.

For search with rewind forward it is necessary to press the button (8) so much times, how many songs be going to pass, - on the display screen the serial number of the chosen thing from a point of inclusion of rewind will be highlighted, the tape will quickly be rewound in demanded position and automatically reproduction will join. Search with scrolling is made in a similar manner, but by means of the button (17) back.

Stop of reproduction and cartridge extraction

Press the button (10) autoradio tape recorder control panels, - magnetic recording reproduction will stop, and the cartridge will be pushed out from a nest кассетоприемника.

Care of a radio tape recorder

While in service autoradio tape recorders the magnetic head cassette decks gradually becomes soiled adjournment of a dust and particles of a magnetic layer showered from a film. At considerable pollution of a magnetic head quality of a sound at reproduction of records worsens. In view of told, it is necessary regularly, through each 30 business hours decks, to make cleaning of a magnetic head.

The negligent relation to care of a radio tape recorder and infringement of the stipulated schedule of cleaning of a magnetic head can lead to a situation when removal of the accumulated adjournment by means of the usual cleaning cartridge will appear impossible.

The design decks provides possibility of an automatic unloading of an audiocassette which for any reasons cannot normally be reproduced. If the cartridge is thrown out even prior to the beginning of reproduction, it speaks about its possible damage, - it is necessary to refrain from attempts of repeated loading of such cartridge. There can be a stop of reproduction of record, unitary or double inclusion of the mechanism of a backspacing, or a cartridge unloading. Usually similar phenomena occur owing to mechanism jamming, or as a result of non-uniformity of resistance to rewind of a magnetic tape on cartridge coils. In this case it is necessary to take an audiocassette and manually to waste a tape on some turns of the reel.

Cassette an autoradio tape recorder deck it is calculated on use of audiocassettes with duration of record till 100 minutes. Application of more capacious cartridges with a thin magnetic film can lead to refusal decks or film deformations.

Attentively examine an audiocassette before inserting it into a reception window decks. If the magnetic film has a considerable weak point, tighten it, rotating a coil nave in the corresponding party by means of a pencil or fingers.

At отслаивании labels glue it or remove completely. Otherwise, the lagged behind label can lead to cartridge jamming at attempt of its extraction. Do not insert in кассетоприемник the deformed or damaged cartridges.

Do not leave an audiocassette in such places where they are exposed to influence of a heat or high humidity, for example, on the top shelf of the panel of devices or in the most cassette a deck, do not insert перегретую or the overcooled cartridge into a radio tape recorder until its temperature is not normalised.

Do not fill in a nest кассетоприемника extraneous subjects.

Audiosystem use in a mode of listening of compact discs from built in CD-changer


The general information

Built in CD-changer is calculated on loading and reproduction to 6 compact discs.

Дископриемник built in CD-changer it is located in the top part of the control panel of an audiosystem. The scheme of an arrangement of elements of management is presented by the built in changer on an accompanying illustration.

The stereoradio tape recorder control panel, - the elements used in a mode of listening of compact discs from built in CD-player



18 — the Button of extraction of a compact disc
19 — Diskopriemnik
20 — the Button of acquaintance with disk contents (SCAN)
21 — the loading Button (LOAD)
22 — the Button of inclusion of a mode of reproduction of record from a compact disc (CD)

23 — Buttons of a choice of the loaded changer of a disk subject to reproduction into shop
24 — the Button of inclusion of a mode of a casual order of reproduction of records from a disk (RDM)
25 — the Button of the accelerated search/search of demanded record (TRACK)
26 — the Button of repetition of reproduction of current record (RPT)


Installation of one compact disc


Presence in shop of a changer of a free position proves to be true a blinking of the digital indicator of the corresponding disk drive in the left top sector of the display of the control panel of an audiosystem. Absence of blinking indicators testifies to completeness of loading of shop disks.

Press button LOAD (21) in the right top corner of the control panel of an audiosystem, - the indicator free дискодержателя should start to blink, and on the display the inscription “IN” will be highlighted. Within the next 15 seconds the prepared compact disc can be filled in дископриемник systems. After partial refuelling the disk will be involved in a reception groove automatically and there and then reproduction of its contents will begin.

For refuelling in a changer more than one disk it is necessary to repeat corresponding quantity of times the procedure described above.

Shop loading is carried out on increase of numbers of free disk drives.

If refuelling of the next disk is not made within the released 15 seconds, the system will automatically pass to reproduction of contained last established disk.

At system switching (by means of buttons FM, FM or TAPE) in a mode of loading of CD-changer last passes to listening of broadcasting/reproduction of a magnetic recording in a waiting mode and reproduction of records will begin with compact discs only after нажимания on CD button.

Installation of one compact disc in a desirable position

Disk loading is made in the similar manner described above with that only a difference that before disk input in дископриемник the choice corresponding (from free) the disk drive by means of located in the bottom part of the control panel of buttons (23) is made.

Loading of all shop

At keeping of button LOAD pressed within more than 1.5 seconds the system passes in a mode of loading of all free disk drives of shop of CD-changer.

The loading principle is similar described above for individual disks, with that difference that transition to procedure of loading of the next disk will be carried out automatically at once on termination of refuelling of the next disk.

On termination of loading of all shop the system automatically passes to reproduction of the contained compact disc established in the disk drive № 1.

Reproduction will begin as well in case the next disk will not be filled in дископриемник within the regular 15 seconds taken away under its loading.


Reproduction of the contained chosen compact disc


Reproduction always begins with the first path of a corresponding disk (the first or next filled, depending on a loading mode - see above).

The choice of a disk subject to reproduction can be made manually by means of one of the buttons (23) located in the bottom part of the control panel of an audiosystem, - on the display the digital indicator with number of the corresponding disk drive will light up.

The choice of a path of a listened disk subject to reproduction can be made by means of handle TRACK (25).

Search of paths of a listened compact disc

— Transition to the beginning following for current paths
— Transition to the beginning ahead of a going path
— Search of paths on increase
— Search of paths on decrease

 


Transition from current (executed) to a path to subsequent/previous is carried out by short-term turn of handle TRACK in a corresponding direction. Keeping of the handle turned within more than 2 seconds leads to consecutive search of paths in the chosen direction. For the search termination release the handle, - reproduction will begin automatically.

Repetition of reproduction of a current path

For return to the beginning of reproduction of a current path press button RPT (26) audiosystem control panels, - on the display the inscription of the corresponding maintenance and system will be highlighted will pass to playing of the chosen path in a continuous cyclic mode.

Mode switching-off is made by repeated pressing of button RPT.

Installation of a mode of a casual order of reproduction of paths

At will of the user the mode of a casual order of reproduction of paths of a listened compact disc can be chosen.

Mode inclusion is made by means of button RDM (24), - on the display screen the inscription of the corresponding maintenance and system will be highlighted will be switched to reproduction of the paths written down on a disk in a casual order.

For mode removal press button RDM once again.

Viewing of a contained listened compact disc

For viewing of a contained listened compact disc press during its reproduction button SCAN (20), - the system will pass to consecutive search of all paths written down on a disk with 10-second reproduction of the beginning of each of them. The given function can be used for search of the demanded name, - to start reproduction of the found path in a usual mode once again press button SCAN.

Extraction of disks from CD-changer shop

Extraction (23) separate disks chosen by means of buttons can be made by means of the button (18) located in the left top corner of the control panel of an audiosystem.

For clearing of all disk drives of shop it is necessary to keep the button (18) pressed before reproduction by system of a characteristic sound signal. If pushed out of дископриемника the next disk is not taken during some time, the mode of clearing of shop will be disconnected automatically.

In order to avoid damage of the pushed out disk as a result of influence of vibrations, try not to leave its sticking out of дископриемника during some long time.


Audiosystem use in a mode of listening of compact discs from external CD-changer


The general information

The stereoradio tape recorder control panel, - the elements used in a mode of listening of compact discs from external CD-changer

27 — the Button of acquaintance with disk contents (SCAN)
28 — the Button of inclusion of a mode of reproduction of record from a compact disc (CD)
29 — Buttons of a choice of the loaded changer of a disk subject to reproduction into shop
30 — the Button of inclusion of a mode of a casual order of reproduction of records from a disk (RDM)
31 — the Button of the accelerated search/search of demanded record (TRACK)
32 — the Button of repetition of reproduction of current record (RPT)

 


The stereosystem design allows to carry out listening of compact discs from CD-changer connected to an autoradio tape recorder.

Reproduction start

To start reproduction press the button of CD (28) audiosystem control panels twice, - on the display screen the inscription of the corresponding content (“CD”) will be highlighted.

Pressing CD button in a radio receiver operating time leads to automatic switching-off of the last and system transition in a mode of reproduction of records with filled in shop of CD-changer of compact discs. Upon termination of record of one disk the system is switched to reproduction next of filled in changer shop, - the blank disk drives are passed.


Choice of a compact disc subject to reproduction


The choice of a compact disc subject to reproduction is carried out by means of the buttons (29) located in the bottom part of the control panel of an audiosystem.

Reproduction of the contained chosen compact disc

Reproduction always begins with the first path of a corresponding disk (the first or next filled, depending on a loading mode - see above).

The choice of a disk subject to reproduction can be made manually by means of one of the buttons (29) located in the bottom part of the control panel of an audiosystem, - on the display the digital indicator with number of the corresponding disk drive will light up.

The choice of a path of a listened disk subject to reproduction can be made by means of handle TRACK (31).

Search of paths of the listened



— Transition to the beginning following for current paths
— Transition to the beginning ahead of a going path
— Search of paths on increase
— Search of paths on decrease

 


Transition from a current (executed) path to subsequent/previous is carried out by short-term turn of handle TRACK in a corresponding direction. Keeping of the handle turned within more than 2 seconds leads to consecutive search of paths in the chosen direction. For the search termination release the handle, - reproduction will begin automatically.

Repetition of reproduction of a current path

For return to the beginning of reproduction of a current path press button RPT (32) audiosystem control panels, - on the display the inscription of the corresponding maintenance and system will be highlighted will pass to playing of the chosen path in a continuous cyclic mode.

Mode switching-off is made by repeated pressing of button RPT.

Installation of a mode of a casual order of reproduction of paths

At will of the user the mode of a casual order of reproduction of paths of a listened compact disc can be chosen.

Mode inclusion is made by means of button RDM (30), - on the display screen the inscription of the corresponding maintenance and system will be highlighted will be switched to reproduction of the paths written down on a disk in a casual order.

For mode removal press button RDM once again.

Viewing of a contained listened compact disc

For viewing of a contained listened compact disc press during its reproduction button SCAN (27), - the system will pass to consecutive search of all paths written down on a disk with 10-second reproduction of the beginning of each of them. The given function can be used for search of the demanded name, - to start reproduction of the found path in a usual mode once again press button SCAN.

Reproduction stop

The stop of functioning of CD-changer can be made by audiosystem transfer in a mode of a radio receiver or listening of a magnetic recording by means of buttons FM/AM or TAPE, or by deenergizing of a food (button PWR/VOL).

Rules of the reference with compact discs

For extraction of a disk from a box press the centre of last and take a disk for edge. The contact of a surface of a disk can lead to its pollution and as consequence to decrease in quality of sounding.

If on a disk there are pollution traces, wipe a surface a pure dry soft scarf in a direction from the centre to edges.

Avoid at rubbing of a disk of radial movements, do not apply at rubbing any solvents, including spirit!

Do not fill in дископриемник the damaged disks.

Try not to suppose heating of disks, do not subject to their influence of a direct sunlight.

Type audiosystem In

Possibility of connection of CD-changer to a type audiosystem In is not provided.

Modes of indication of the display

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver



1 — the stereoreception Indicator (ST)
2 — the Indicator of a wave range of reception (AM/FM)
3 — the Indicator of frequency of the reproduced channel
4 — Number of the tuner of the fixed channel brought in memory
5 — the Button of switching of modes of indication of the display (DISP)
6 — the Button of switching of a wave range (АМ/FM)

7 — Buttons of a choice of the fixed channels
8 — adjustment Buttons
9 — the Switch of a food/regulator of loudness (ON/VOL)
10 — the Button of inclusion of a mode of automatic adjustment of the tuner (SCN)
11 — the transition Button in a mode of adjustment of a timbre of sounding/balancing of level of reproduction (Т/В)


The display of the control panel of a radio tape recorder can function in one of two basic operating conditions: a mode of indication of current time and a mode of indication of a working condition systems (radio receiver/tape recorder). Switching between modes is carried out by means of button DISP (22) on the control panel.

The mode of indication of current time has a priority over a mode of indication of a working condition.

Current time is displayed the radio tape recorder display only at the included ignition.


Installation of hours


Include ignition.

For transition in a mode of editing of indications of a digital watch press button DISP (22) radio tape recorder control panels. Updating of value of the hour indicator is made by means of the left button TUNING (23), - button DISP also is kept by the pressed. Minutes are corrected similarly by means of the right button TUNING.

Switching-off of the storage battery leads to dump of indications of hours!


Audiosystem use in a radio receiver mode

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver

1 — the stereoreception Indicator (ST)
2 — the Indicator of a wave range of reception (AM/FM)
3 — the Indicator of frequency of the reproduced channel
4 — Number of the tuner of the fixed channel brought in memory
5 — the Button of switching of modes of indication of the display (DISP)
6 — the Button of switching of a wave range (АМ/FM)

7 — Buttons of a choice of the fixed channels
8 — adjustment Buttons
9 — the Switch of a food/regulator of loudness (ON/VOL)
10 — the Button of inclusion of a mode of automatic adjustment of the tuner (SCN)
11 — the transition Button in a mode of adjustment of a timbre of sounding/balancing of level of reproduction (Т/В)


The detailed description used in a mode of radio reception of elements of management of the forward panel of an audiosystem of type In is presented on an accompanying illustration.

Inclusion of a food/volume control of sounding (PWR/VOL)

At regular connection the audiosystem functions, when the ignition key is in position ACC (1) or ON (2). In the first position of a key a food of auxiliary consumers of the electric power joins, in the second - ignition and a food of all consumers of the electric power is included.

Audiosystem inclusion is made by нажимания on push-button handle PWR/VOL (9). Rotation of the same handle in a reproduction mode allows to carry out reproduction volume control.

The same handle makes adjustments of a timbre of sounding and balance of loudness of reproduction at a choice of corresponding modes (see more low). The order of use of a regulator is described in the table.

The chosen mode

Indication on the display

Rotation counter-clockwise

Rotation clockwise

Adjustment of a timbre of sounding in a low-frequency range BASS Level easing Level increase
Adjustment of a timbre of sounding in a high-frequency range TRE Level easing Level increase
Balancing of level of reproduction between the right and left loudspeakers BAL Displacement to the left Displacement to the right
Balancing of level of reproduction between forward and back loudspeakers FAD Displacement back Displacement forward
Reproduction volume control VOL More silently More loudly


Adjustment of a timbre of sounding and balancing of level of reproduction (TONE/BAL)

Transition in modes of adjustment of a timbre of sounding of low/high frequencies, and balancing of level of reproduction between forward/back and right/left loudspeakers with return to a mode регулриовки loudness is made by consecutive pressing push-button switch TONE/BAL (11). The mode chosen by the current moment (see the table above) is displayed on the screen of the display in the form of a corresponding inscription (“BAS”, ”TRE”, “FAD” or “BAL”, - in the specified sequence is perfectly in order нажимания on button T/V). Adjustment is carried out by means of the handle (9).

At non-use within more than 5 seconds the system automatically comes back in a mode of volume control of reproduction (VOL).


Radio receiver adjustment


Switching of ranges of accepted radio frequencies is made by means of button FM/AM (6) on the radio receiver control panel. Tuner characteristics allow to carry out reception in средневолновом a range (MW) in a mode of peak modulation (АМ) and one ultrashort-wave range (UKW) in a mode of frequency modulation (FM).

In a mode of frequency modulation (FM) possibility of reproduction of a stereoannouncement is provided, - on the display screen the inscription “ST” will be highlighted.

In each of the listed ranges (UKW/MW) the system allows to make adjustment by three possible ways: manually (TUNE), automatically (SCAN), and options for preliminary chosen radio stations, which frequencies are brought in memory of the tuner.

Manual adjustment (function TUNE) is made by means of buttons TUNING (23), - for change of frequency of reception of the tuner towards reduction or increase press the left or right button accordingly.

Transition is carried out with step 9/5 кГц in средневолновом a range and 0.1 MHz in an ultrashort-wave range. If possibility of switching of a step in средневолновом a range is provided, it is carried out by means of special buttons SN1 and СН2, after keeping of button AM/FM (6) pressed during not less than 3 seconds.

Transition in a mode of automatic adjustment (SCAN) is made by means of button SCN (10). In the given mode the tuner carries out viewing of all chosen range of frequencies from below upwards. At hit the receiver for 5 seconds is switched to active radio station in a reproduction mode, then if the choice is not confirmed by repeated pressing of button SCAN, again will pass to scanning.

Signal easing, and also presence nearby natural barriers (mountain, high-rise buildings, etc.) can lead to infringement of serviceability of functioning of the tuner in a mode of automatic adjustment.

Adjustment of a radio receiver for preliminary chosen stations. By means of six numbered buttons (7) in memory of a radio receiver frequencies of favourite radio stations can be brought. Each button allows to program one frequency in средневолновом a range (АМ) and one frequency in range FM. To program memory of a radio receiver, execute following operations:

    a) By means of buttons AM/FM choose a demanded range of radio frequencies (MW or UKW);
    b) One of offered above ways adjust a radio receiver on desirable radio station;
    c) Choose for the given radio station one of six buttons of programming of memory, press and keep it until will hear a short sound signal;
    d) Repeat operations with the first on the third to bring in memory of a radio receiver of frequency of six radio stations;
    e) Now it is enough to press any of six buttons of programming of memory of a radio receiver that it was automatically adjusted on preliminary chosen station which frequency of a signal is brought in a corresponding cell of memory of the tuner.

For inclusion of reception of the fixed channel in the chosen frequency range press on corresponding of buttons (7), - on the display screen channel number will be highlighted.

Frequencies of preliminary options of a radio receiver are erased from memory at failure (the strong category) or switching-off of the storage battery, and also at extraction of a safety lock of an audiosystem!


Audiosystem use in a tape recorder mode


The general information

The stereoradio tape recorder control panel, - the elements used in a mode of the tape recorder



12 — the Indicator of a direction of movement of a tape
13 — the Indicator of use of the metallized film (MTL)
14 — the Indicator of use of system of suppression of noise (In NR)
15 — the Indicator of reproduction to a magnetic recording (CONTAINER)
16 — the Button of a stop of reproduction/extraction of the cartridge

17 — Kassetopriemnik
18 — Buttons of switching of a direction of scrolling / the accelerated rewind in a corresponding direction
19 — the Button of a choice of a mode of reproduction of record from the metallized film (MTL)
20 — the Button of activation of a mode шумоподавления Dolby-NR (BRN)
21 — the transition Button in the beginning of the flowing/next record (TPS)


The scheme of an arrangement used in a mode of the tape recorder of elements of management of the forward panel of an audiosystem of type And it is presented on an accompanying illustration.

Management of the general options of a timbre and loudness of reproduction is made the same as and in a radio receiver mode.

Make sure of density of winding of a tape on cartridge coils. Insert the cartridge in кассетоприемник, - record reproduction will begin automatically even if the radio receiver or the CD player earlier have been included.

At listening of the films which have been written down with application of system шумоподавления Dolby (with mark NR) the system of suppression of noise can be activated by means of button BRN (20), - on the display screen the inscription of the corresponding maintenance (“In NR”) will be highlighted, - see in the same place. System switching-off шумоподавления is made by repeated pressing the same button.

The used system Dolby made under licence Dolby Laboratories Licensing Corporation. “Dolby”, and also the pictogramme in the form of two stylised letters D are the registered trade marks of company Dolby Laboratories Licensing Corporation.

At listening of audiocassettes with the metallized film (METAL or CrO2) it is necessary to press button MTL (19) radio tape recorder control panels.

Choice of a direction of listening of a magnetic tape

Switching of a direction of listening (path) of a magnetic tape is carried out by means of buttons PROG (18). The current direction прокручивания films is displayed on the screen of the display by pictogrammes.

Automatic switching of a direction of reproduction (automatic reversion) occurs also at the film termination.


The accelerated rewind of a magnetic tape


Film rewind in a corresponding direction is made also by means of buttons PROG (18). The rewind stop can be made by repeated pressing corresponding button PROG.

Transition in the beginning of current record following/return in the beginning

At нажимании (21) tape recorder passes to button TPS in a mode of search of the beginning of record. For return to the beginning of current record pass in mode TPS, - on the display screen the corresponding message should be highlighted, - and press left of buttons PROG (18), for transition in the beginning of the next record it is necessary to take advantage, accordingly, of the right button PROG.

For uninterrupted functioning of function TPS of a pause between records on a film should make not less than 4 seconds and to be free from noise.


Stop of reproduction and cartridge extraction


Press the button (16) autoradio tape recorder control panels, - magnetic recording reproduction will stop, and the cartridge will be pushed out from a nest кассетоприемника.

On some models cartridge ejection can be made also at ignition deenergizing, - do not forget to take the cartridge from a nest кассетоприемника.


Care of a radio tape recorder

While in service autoradio tape recorders the magnetic head cassette decks gradually becomes soiled adjournment of a dust and particles of a magnetic layer showered from a film. At considerable pollution of a magnetic head quality of a sound at reproduction of records worsens. In view of told, it is necessary regularly, through each 30 business hours decks, to make cleaning of a magnetic head.

The negligent relation to care of a radio tape recorder and infringement of the stipulated schedule of cleaning of a magnetic head can lead to a situation when removal of the accumulated adjournment by means of the usual cleaning cartridge will appear impossible.

The design decks provides possibility of an automatic unloading of an audiocassette which for any reasons cannot normally be reproduced. If the cartridge is thrown out even prior to the beginning of reproduction, it speaks about its possible damage, - it is necessary to refrain from attempts of repeated loading of such cartridge. There can be a stop of reproduction of record, unitary or double inclusion of the mechanism of a backspacing, or a cartridge unloading. Usually similar phenomena occur owing to mechanism jamming, or as a result of non-uniformity of resistance to rewind of a magnetic tape on cartridge coils. In this case it is necessary to take an audiocassette and manually to waste a tape on some turns of the reel.

Cassette an autoradio tape recorder deck it is calculated on use of audiocassettes with duration of record till 90 minutes. Application of more capacious cartridges with a thin magnetic film can lead to refusal decks or film deformations.

Attentively examine an audiocassette before inserting it into a reception window decks. If the magnetic film has a considerable weak point, tighten it, rotating a coil nave in the corresponding party by means of a pencil or fingers.

At отслаивании labels glue it or remove completely. Otherwise, the lagged behind label can lead to cartridge jamming at attempt of its extraction. Do not insert in кассетоприемник the deformed or damaged cartridges.

Do not leave an audiocassette in such places where they are exposed to influence of a heat or high humidity, for example, on the top shelf of the panel of devices or in the most cassette a deck, do not insert перегретую or the overcooled cartridge into a radio tape recorder until its temperature is not normalised.

Do not fill in a nest кассетоприемника extraneous subjects.

Audiosystem of type With

Possibility of use of an audiosystem With in a tape recorder mode is absent.


The general information

The audiosystem of type With is equipped by the demountable control panel.

The system provides only two operating conditions: a mode of a radio receiver and a mode of listening of compact discs. A deck for listening of a magnetic recording in the given complete set is absent.

The number of the additional functions supported by the tuner of an audiosystem of type With includes function of reception of the radio data (RDS), - see more low.

Removal and control panel installation

Отпускание a clamp of fastening of the demountable control panel it is made by pressing the button (5).

Under the control panel the light-emitting diode blinking by red light warning potential burglars is located that the system is protected. The light-emitting diode can be disconnected from the control panel by pressing button POWER (1).

Watch a condition клеммных connections of a contact socket of the control panel, do not forget to wipe regularly their methyl spirit.

Audiosystem use in a radio receiver mode

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver



1 — the Button of inclusion/deenergizing of a food (POWER)
2 — volume control Buttons
3 — the Button of switching of modes of adjustment/increase of level of reproduction of high and low frequencies (SELECT/LOUD)
4 — the Button of switching of templates of adjustment of an equalizer (SOUND)
5 — the Button отпускания a clamp of fastening of the demountable control panel
6 — Button SEARCH UP


7 — the Button of inclusion of function of automatic storing (AST)
8 — Button SEARCH DOWN
9 — Button BAND/SCAN
10 — the Button of inclusion of a mode of the message of the traffic (TA)
11 — Button SOURCE/MUTE
12 — Buttons of a choice of the fixed channels

The detailed description used in a mode of radio reception of elements of management of the forward panel of an audiosystem of type And is presented on an accompanying illustration.

Food inclusion (POWER)

At regular connection the audiosystem functions, when the ignition key is in position ACC (1) or ON (2). In the first position of a key a food of auxiliary consumers of the electric power joins, in the second - ignition and a food of all consumers of the electric power is included.

Audiosystem inclusion/deenergizing is made by нажимания on button POWER (1).

Reproduction volume control

Reproduction volume control is made by means of two buttons (2) located in the left top corner of the control panel of an audiosystem, - pressing the button “-” leads to loudness decrease, “+” - to increase.

Adjustment of a timbre of sounding and balancing of level of reproduction (SELECT)

Transition in modes of adjustment of a timbre of sounding of low/high frequencies, and balancing of level of reproduction between forward/back and right/left loudspeakers with return to a mode регулриовки loudness is made by consecutive pressing push-button switch SELECT (3). The following order of switching of modes Takes place: VOLUME (Loudness) – BASS (Adjustment of low frequencies) - TREBLE (Adjustment of high frequencies) - FADE (Adjustment of level of reproduction between forward and back loudspeakers) - BALANCE (adjustment of level of reproduction between the left and right loudspeakers). Adjustment is carried out by means of buttons of a regulator of loudness (2).

At non-use within more than 5 seconds the system automatically comes back in the basic mode - reproduction volume controls (VOLUME).


Increase of level of reproduction of high and low frequencies at the lowered loudness of sounding


Button SELECT keeping (see above) pressed within not less than 2 seconds allows the user to raise reproduction level in ВЧ and LF ranges at the lowered loudness of sounding (mode LOUDNESS). Mode switching-off is made by means of the same button. At mode inclusion/deenergizing on the display screen the inscription of the corresponding maintenance (“LOUD ON” / ”LOUD OFF”) is quickly highlighted.

Radio receiver adjustment

Switching of ranges of accepted radio frequencies is made by means of button BAND (9) on the radio receiver control panel. Tuner characteristics allow to carry out reception in three basic frequency ranges in modes АМ and FM, thus two of the mentioned ranges, are in turn broken into five поддиапазонов that in total makes 6 separate поддиапазонов (see the table).

Modulation mode

The name of a range of frequencies

Kol-in поддиапазонов

Range borders

FM
VHF
UKW1, UKW2, UKW3 87,5 ÷ 108 MHz
АМ
СВ
MW1, MW2 531 ÷ 1629 кГц
ДВ
LW 144 ÷ 288 кГц

In a mode of frequency modulation (FM) possibility of reproduction of a stereoannouncement is provided, - on the display screen the inscription “ST” will be highlighted.


Search of active radio stations

Search of active radio stations in each of listed frequency поддиапазонов is made by means of buttons (6) and (8), located in the right bottom corner of the control panel of an audiosystem.

Manual adjustment

For adjustment for the concrete set frequency it is necessary to pass in a mode of manual adjustment. Transition is carried out by keeping of button MANUAL (7) pressed during not less 2 seconds, - should work биппер. Transition to demanded frequency is made by means of the same keys (6) and (8) which were used by search of active radio stations.

Transition to demanded frequency can be carried out in accelerated (keep the corresponding button pressed), or a step-by-step mode (buttons are pressed quickly).

Return to a mode of search of active radio stations is made automatically on the expiration of 1 minute.


Automatic adjustment (mode SCAN)

Automatic adjustment of a radio receiver is made by means of button BAND/SCAN (9). Quickly press the button: on the display screen the inscription “SCAN” will be highlighted and the chosen frequency range, further the tuner will pass to viewing of all chosen range from below upwards. At hit the receiver for 10 seconds is switched to active radio station in a reproduction mode (with выcandlesиванием on the display of the name of radio station/frequency of an announcement and the chosen range), then if the choice is not confirmed by repeated pressing of button SCAN, again will pass to scanning.

Signal easing, and also presence nearby natural barriers (mountain, high-rise buildings, etc.) can lead to infringement of serviceability of functioning of the tuner in a mode of automatic adjustment.

Adjustment of a radio receiver for preliminary chosen stations.

By means of six numbered buttons (12) in memory of a radio receiver frequencies of favourite radio stations can be brought. Each button allows to program on one frequency in everyone their six frequency поддиапазонов (all 6х6 = 36 fixed stations). To program memory of a radio receiver, execute following operations:

    a) By means of buttons AM/FM choose a demanded range of radio frequencies (LW, MW1/MW2 or UKW1/UKW2/UKW3);
    b) One of offered ways (see above) adjust a radio receiver on desirable radio station;
    c) Choose for the given radio station one of six buttons of programming of memory, press and keep it until will hear a short sound signal;
    d) Repeat operations with the first on the third to bring in memory of a radio receiver of frequency of six radio stations;
    e) Now it is enough to press any of six buttons of programming of memory of a radio receiver that it was automatically adjusted on preliminary chosen station which frequency of a signal is brought in a corresponding cell of memory of the tuner.

For inclusion of reception of the fixed channel in the chosen frequency range press on corresponding of buttons (12), - on the display screen channel number will be highlighted.

Frequencies of preliminary options of a radio receiver are erased from memory at failure (the strong category) or switching-off of the storage battery, and also at extraction of a safety lock of an audiosystem!


Automatic preservation (automatic preservation of six radio stations on UKW3
Or MW a range)

Application of automatic preservation gives the chance to keep simple pressing of the button to six radio stations in a current range of reception (excluding LW and KW). Apply automatic preservation to fast search of the most powerful radio stations if you, for example, move on all range of reception.

At use of automatic preservation new radio stations replace earlier kept in ranges of reception UKW3 (for UKW) and MW2 (for MW).

Casual нажимание buttons of automatic preservation AST (7) leads to interruption of a mode of automatic preservation. For repeated activation of a mode it is enough to switch off and again to include an audiosystem.

Automatic preservation of radio stations on keys of the fixed radio stations (only for UKW3 or MW2)

By means of button BAND (9) choose a range of reception UKW3 or MW2 in which intend to make radio station preservation.

Press the button of automatic preservation AST (7), - the receiver will publish a characteristic sound and will stop announcements, on the display inscription AST will be highlighted.

Дале, the tuner begins search of radio station of current frequency with preservation of six radio stations in the chosen frequency range (UKW3 or MW2).

On termination of preservation the characteristic sound signal again will be distributed, then reproduction kept on the button of the fixed channel of frequency will begin.

If it is not possible to find six radio stations, not involved keys of the fixed channels (for example, 5 and 6) are programmed by zero (000).


Switching of templates of adjustment of an equalizer

The audiosystem is equipped by the built in equalizer with sample options. Equalizer adjustment is carried out by means of button SOUND (4) by a choice of one of following standard templates:

    a) BASS-TRE: strengthens a timbre of low and high frequencies.
    b) FLAT: levels all range of frequencies
    c) JAZZ: tonality adjustment corresponds to a jazz
    d) VOCAL: tonality adjustment corresponds to vocal music
    e) CLASSIC: tonality adjustment corresponds to classical music
    f) ROCK: tonality adjustment corresponds fate to music

Switching is made by consecutive pressing of the button as it should be as transfer of templates.

System of radio given RDS (FM)

Quality stated below the information leaves much to be desired and is caused exclusively by the form of a statement of the primary source.

RDS represents system at which in addition to usual UKW not heard digital information is transferred to radio stations. The tuner uses RDS the information for reception of the following data:

    a) the radio station Name, - on the display instead of frequency is deduced the name of accepted radio station;
    b) the Choice of alternative frequency (AF), - the tuner continuously chooses that which provides optimum quality of reception in the given region from the list of alternative frequencies of the given channel;
    c) the Road information, - If TA-function is made active, the radio receiver is adjusted on radio station which gives the road information (ТР=Trafic Program) and accepts messages by phone about the road information (ТА=Trafic Announcement) if last is transferred. You can receive the specified road information by phone also in a usage time of a cassette player or CD чейнджера* or at inclusion of a radio receiver without a sound;
    d) the Latest news, - if it is made active NEWS-function, you can accept the latest news also in a usage time of a cassette player or CD чейнджера* or at inclusion of a radio receiver without a sound;
    e) the Information from belonging radio stations, - EON function (Enhanced Other Network) represents RDS service with which some radio stations are connected. If you are adjusted on any radio station which by means of EON is connected with other radio stations the radio receiver can receive the road information by phone and-or the latest news from the adjusted radio station, and also from belonging radio stations;
    f) Automatic tracking for RDS regional programs, - the radio receiver at reception of regional programs provides possibility of as much as possible long adjustment for the same regional program;
    g) Emergency transfer by phone (PTY alarm), - the radio receiver automatically accepts emergency messages which are transferred at application of emergency service RDS-PTY (during transfer the display alternately displays an inscription “ALARM” and a radio station name).

Modes TA (emergency transfers of road radio station) and NEWS (latest news)

For adjustment That - or a NEWS-mode press at first «BAND» a key and choose UKW radio station. Then press button INSERT (10).

Each pressing button INSERT leads to the next switching of mode RDS in a following order:

    a) THAT Vkl, - on the display is highlighted an inscription “THAT ON”
    b) THAT Incl., news of Vkl - on the display is highlighted an inscription “NEWS ON”
    c) THAT Incl., news of Vykl - on the display is highlighted an inscription “NEWS OFF”
    d) THAT Vykl, news of Vkl - on the display is highlighted an inscription “THAT OFF”

If on the display the inscription “NO TA” is highlighted, hence, the tuner is not adjusted yet on radio station which provides reception of emergency transfer of road radio station. The radio receiver automatically prospects until will find other radio station.

Now you can hear emergency transfers road radio stations/latest news if they are transferred.

If the radio receiver accepts emergency transfers of road radio station (or the latest news) from other radio station (connected by means of system EON), on the display the name of corresponding radio station is temporarily highlighted.

If the mode THAT is included (emergency transfers of road radio station), there is a radio station search only on the frequencies providing reception of emergency transfers of road radio station.

If you at the included mode THAT lose CD or have not included a radio receiver sound, despite it you can hear emergency transfers of road radio station (or the latest news) if they are transferred.

If the adjusted radio station is very weak to execute function RDS of road radio station, you can hear the characteristic sound signals repeated with intervals. Use a search mode to find other radio station.

If the radio receiver continuously searches for radio station you are in area where there are no emergency transfers of road radio station with RDS-service application. Quickly press button INSERT to switch off a mode THAT.

Audiosystem use in a mode of listening of compact discs from built in CD-player

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of listening of compact discs from built in CD-player

13 — Diskopriemnik
14 — the Key of emission of a disk
15 — the Button of repetition of reproduction of a current path
16 — Buttons of search of a path

17 — the Button of inclusion of a mode of a casual order of reproduction
18 — the Button of inclusion of a mode of viewing of a contained compact disc (SCAN)
19 — the Primary button


Compact disc installation

Keeping developed by an inscription upwards a disk a finger passed in the central aperture, cautiously fill it in дископриемник, - retraction of a disk in the disk drive will occur automatically.

At attempt to fill a disk in дископриемник an inscription downwards there will be its pushing out with automatic player switching-off.


Reproduction of a contained compact disc


To start reproduction of record from a compact disc press button SOURCE (19) control panels of an audiosystem. Reproduction begins with the first path written down on a disk. On termination of reproduction of last name the system comes back to playing of the first path.

The choice of a path of a listened disk subject to reproduction can be made by means of buttons (16) control panels.

Transition from current (executed) to a path to subsequent/previous is carried out by short-term pressing on corresponding of buttons (16), - on the display screen number of an active path will be deduced.

Keeping of the button pressed within more than 0.5 seconds leads to consecutive search of paths in the chosen direction. For the search termination release the button, - reproduction will begin automatically.

Repetition of reproduction of a current path

For return to the beginning of reproduction of a current path press button REPEAT (15) audiosystem control panels, - on the display the inscription of the corresponding maintenance and system will be highlighted will pass to playing of the chosen path in a continuous cyclic mode.

Mode switching-off is made by repeated pressing of button REPEAT.

Installation of a mode of a casual order of reproduction of paths

At will of the user the mode of a casual order of reproduction of paths of a listened compact disc can be chosen.

Mode inclusion is made by means of button RANDOM (17), - on the display screen the inscription of the corresponding maintenance and system will be highlighted will be switched to reproduction of the paths written down on a disk in a casual order.

For mode removal press button RANDOM once again.

Viewing of a contained listened compact disc

For viewing of a contained listened compact disc press during its reproduction button SCAN (18), - the system will pass to consecutive search of all paths written down on a disk with 10-second reproduction of the beginning of each of them. The given function can be used for search of the demanded name, - to start reproduction of the found path in a usual mode once again press button SCAN.

Extraction of a disk from дископриемника CD-player

Disk extraction is made by means of the button (14) located in the right top corner of the control panel of an audiosystem.

In order to avoid damage of the pushed out disk as a result of influence of vibrations, try not to leave its sticking out of дископриемника during some long times.


Rules of the reference with compact discs

See above.

Audiosystem of type D

Possibility of use of an audiosystem With in a tape recorder mode is absent.


Modes of indication of the display

Installation of hours



42 — the Button of switching of modes of the display
43 — the Button of editing of minutes ()
44 — the Button of editing of hours ()
45 — the Button of zeroing of minutes (AS)
46 — Indication of current time

 


The display of the control panel of a radio tape recorder can function in one of two basic operating conditions: a mode of indication of current time and a mode of indication of a working condition systems (radio receiver/tape recorder). Switching between modes is carried out by means of button DISP/CLK (42) on the control panel.

The mode of indication of current time has a priority over a mode of indication of a working condition.

Current time is displayed the display only at the included ignition.

Installation of hours

Include ignition.

For transition in a mode of editing of indications of a digital watch press button DISP/CLK (42) radio tape recorder control panels. Updating of value of the hour indicator is made by means of the left button H (44) at simultaneously kept pressed button DISP/CLK. Minutes are corrected similarly by means of the button of M (43). For zeroing of minute indications on an exact times signal press simultaneously buttons DISP/CLK and AS (45).

At zeroing the rounding off rule, i.e. if the current indication makes less than 30 works, the indication of the hour indicator at zeroing will not change, more than 29 - will increase by unit.

Switching-off of the storage battery leads to dump of indications of hours!

Audiosystem use in a radio receiver mode

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver

1 — the Switch of a food and a regulator of loudness/timbre of low and high frequencies/levels of reproduction between loudspeakers
2 — Handles of adjustment of the tuner
3 — the Button of inclusion of modes of search and automatic storing (SCN/AS)
4 — Buttons of a choice of the fixed channels
5 — the Button of switching of frequency ranges (АМ/FM)
6 — the Button of switching of modes of reproduction (A-MODE/LOUD)
7 — the Button of switching of modes of functioning of the display (DISP)

8 — the stereoreproduction Indicator
9 — Indicators of frequency ranges
10 — Indicators of numbers of the fixed channels
11 — the Indicator of inclusion of a mode of scanning (SCN)
12 — the Indicator of inclusion of mode LOUD
13 — the Indicator of frequency of the accepted channel


Inclusion of a food/volume control of sounding

At regular connection the audiosystem functions, when the ignition key is in position ACC (1) or ON (2). In the first position of a key a food of auxiliary consumers of the electric power joins, in the second - ignition and a food of all consumers of the electric power is included.

Audiosystem inclusion is made by нажимания on the push-button handle (1). Rotation of the same handle in a reproduction mode allows to carry out sounding volume control.

The same handle makes adjustments of a timbre of sounding and balance of loudness of reproduction at a choice of corresponding modes (see more low). The order of use of a regulator is described in the table.

The chosen mode

Indication on the display

Rotation counter-clockwise

Rotation clockwise

Adjustment of a timbre of sounding in a low-frequency range BASS Level easing Level increase
Adjustment of a timbre of sounding in a high-frequency range TRE Level easing Level increase
Balancing of level of reproduction between the right and left loudspeakers BAL Displacement to the left Displacement to the right
Balancing of level of reproduction between forward and back loudspeakers FAD Displacement back Displacement forward
Reproduction volume control VOL More silently More loudly

Adjustment of a timbre of sounding and balancing of level of reproduction

Transition in modes of adjustment of a timbre of sounding of low/high frequencies, and balancing of level of reproduction between forward/back and right/left loudspeakers with return to a mode регулриовки loudness is made by consecutive pressing push-button switch A-MODE (6). The mode chosen by the current moment (see the table above) is displayed on the screen of the display in the form of a corresponding inscription (“BAS”, ”TRE”, "BAL" or "FAD", - in the specified sequence is perfectly in order нажимания on button A-MODE). Adjustment is carried out by means of the handle (1).

At non-use within more than 7 seconds the system automatically comes back in a mode of volume control of reproduction (VOL).


Radio receiver adjustment

The stereoradio tape recorder control panel, - the elements used in a mode of a radio receiver

1 — the Switch of a food and a regulator of loudness/timbre of low and high frequencies/levels of reproduction between loudspeakers
2 — Handles of adjustment of the tuner
3 — the Button of inclusion of modes of search and automatic storing (SCN/AS)
4 — Buttons of a choice of the fixed channels
5 — the Button of switching of frequency ranges (АМ/FM)
6 — the Button of switching of modes of reproduction (A-MODE/LOUD)
7 — the Button of switching of modes of functioning of the display (DISP)

8 — the stereoreproduction Indicator
9 — Indicators of frequency ranges
10 — Indicators of numbers of the fixed channels
11 — the Indicator of inclusion of a mode of scanning (SCN)
12 — the Indicator of inclusion of mode LOUD
13 — the Indicator of frequency of the accepted channel


Switching of ranges of accepted radio frequencies is made by means of button FM/AM (5) on the radio receiver control panel. Tuner characteristics allow to carry out reception in two средневолновых ranges (MW1 and MW2) in a mode of peak modulation (АМ) and two ultrashort-wave ranges (UKW1 and UKW2) in a mode of frequency modulation (FM).

In a mode of frequency modulation (FM) possibility of reproduction of a stereoannouncement is provided, - on the display screen the inscription “ST” (8) will be highlighted.

In each of the listed ranges (MW and UKW) the system allows to make adjustment by three possible ways: manually (TUNE), automatically (SCAN), and options for preliminary chosen radio stations, which frequencies are brought in memory of the tuner.

Manual adjustment (function TUNE) is made with the help ползунковых handles (2), - for change of frequency of reception of the tuner towards reduction or increase turn any of two ползунковых handles (2) in a corresponding direction.

Transition is carried out with step 9 кГц in средневолновом a range and 0.1 MHz in an ultrashort-wave range. At keeping of handles turned, the tuner will look through a range of frequencies in a corresponding direction before detection of the nearest active channel on which will stop, - for renewal of a mode of search again turn the handle.

Transition in a mode of automatic adjustment (SCAN) is made by means of button SCN (3). In the given mode the tuner carries out viewing of all chosen range of frequencies from below upwards. At hit the receiver for 10 seconds is switched to active radio station in a reproduction mode, then if the choice is not confirmed by repeated pressing of button SCAN, again will pass to scanning.

Signal easing, and also presence nearby natural barriers (mountain, high-rise buildings, etc.) can lead to infringement of serviceability of functioning of the tuner in a mode of automatic adjustment.

Adjustment of a radio receiver for preliminary chosen stations. By means of six numbered buttons (4) in memory of a radio receiver frequencies of favourite radio stations can be brought. Each button allows to program one frequency in средневолновом a range (АМ) and one frequency in range FM. To program memory of a radio receiver, execute following operations:

    a) By means of buttons AM/FM choose a demanded range of radio frequencies (MW1/MW2 or UKW1/UKW2);
    b) One of offered above ways adjust a radio receiver on desirable radio station;
    c) Choose for the given radio station one of six buttons of programming of memory, press and keep it until will hear a short sound signal;
    d) Repeat operations with the first on the third to bring in memory of a radio receiver of frequency of six radio stations;
    e) Now it is enough to press any of six buttons of programming of memory of a radio receiver that it was automatically adjusted on preliminary chosen station which frequency of a signal is brought in a corresponding cell of memory of the tuner.

For inclusion of reception of the fixed channel in the chosen frequency range press on corresponding of buttons (4), - on the display screen channel number will be highlighted.

Frequencies of preliminary options of a radio receiver are erased from memory at failure (the strong category) or switching-off of the storage battery, and also at extraction of a safety lock of an audiosystem!

Sound биппер can be disconnected by simultaneous нажимания on buttons DISP and the button of the corresponding fixed channel, - on the display screen the inscription “BEEP”, then - "OFF" will be highlighted, inclusion биппера is made in a similar manner (on the display it will be highlighted “BEEP”, then - “ON”).


Inclusion of mode LOUDNESS

Inclusion of mode LOUDNESS allows to allocate low and high frequencies of sounding at maintenance low or a loudness average level. For mode inclusion press and keep pressed during not less than 2 seconds button A-MODEL/LOUD, - on the display screen the inscription “LOUD” should be highlighted.

Mode switching-off is made in a similar manner.

Audiosystem use in a mode of listening of compact discs from built in CD-player

The general information

The stereoradio tape recorder control panel, - the elements used in a mode of listening of compact discs from built in CD-player



14 — CD/TOP Button
15 — the Key of emission of a compact disc
16 — Diskopriemnik
17 — the Button of switching of modes of functioning of the display (DISP)
18 — Handles of scrolling of record forward/back (FF/FB - and UP/DWN)
19 — the Button of repetition of reproduction of a current path (RPT)
20 — the Button of inclusion of a mode of a casual order of reproduction of a contained disk (RDM)

21 — the Indicator of a mode of listening of record from a compact disc (DISC)
22 — the Indicator of use of 8-sm of a compact disc (SINGLE)
23 — the Indicator of time of reproduction
24 — the Indicator of number of a path
25 — the Indicator of inclusion of a mode of a casual order of reproduction (RDM)
26 — the Indicator of inclusion of a mode of repetition of current record (RPT)


Compact disc installation

Keeping developed by an inscription upwards a disk a finger passed in the central aperture, cautiously fill it in дископриемник, - retraction of a disk in the disk drive will occur automatically.

At attempt to fill a disk in дископриемник an inscription downwards there will be its pushing out to automatic switching-off of a player.

The player provides possibility of listening of compact discs of the 8-centimetric standard (Single-CD). Thus necessity for use of any adapters is absent. At refuelling in дископриемник such disk on the display screen indicator "SINGLE" (22) will in addition be highlighted.

Reproduction of a contained compact disc

To start reproduction of record from a compact disc press the button of CD/TOP (14) control panels of an audiosystem, - on the display screen indicator "DISC" (+ “SINGLE”) will light up. Reproduction begins with the first path written down on a disk. On termination of reproduction of last name the system comes back to playing of the first path.

Pressing CD/TOP button at the disk filled in the disk drive during radio reception last automatically will interrupt also system will pass to playing of record from a compact disc.

The choice of a path of a listened disk subject to reproduction can be made by means of handles (18) control panels.

Transition from a current (executed) path to subsequent/previous is carried out by short-term turn of handles - on the display screen number of an active path will be deduced. Regulator keeping turned within more than 2 seconds leads to consecutive search of paths in the chosen direction. For the search termination release the handle, - reproduction will begin automatically.

Repetition of reproduction of a current path

For return to the beginning of reproduction of a current path press button RPT (19) audiosystem control panels, - on the display the inscription of the corresponding maintenance and system will be highlighted will pass to playing of the chosen path in a continuous cyclic mode.

Mode switching-off is made by repeated pressing of button RPT.

Installation of a mode of a casual order of reproduction of paths

At will of the user the mode of a casual order of reproduction of paths of a listened compact disc can be chosen.

Mode inclusion is made by means of button RDM (20), - on the display screen the inscription of the corresponding maintenance and system will be highlighted will be switched to reproduction of the paths written down on a disk in a casual order.

For mode removal press button RDM once again.

Switching of modes of functioning of the display

Switching of modes of functioning of the display is made by means of button DISP (17) and carried out in a following order: path Number - reproduction Time - Hours.

Extraction of a disk from дископриемника CD-player

Disk extraction is made by means of the button (15) located in the right top corner of the control panel of an audiosystem.

In order to avoid damage of the pushed out disk as a result of influence of vibrations, try not to leave its sticking out of дископриемника during some long times.


Audiosystem use in a mode of listening of compact discs from external CD-changer

The general information

The stereosystem design allows to carry out listening of compact discs from CD-changer connected to an autoradio tape recorder.

The stereoradio tape recorder control panel, - the elements used in a mode of listening of compact discs from external CD-changer



27 — CD CH/MAG Button
28 — the Button of inclusion of a mode of a casual order of reproduction (RDM)
29 — the Button of repetition of reproduction of a current path (RPT)
30 — the Button of switching of modes of functioning of display DISP
31 — Handles of the accelerated search/search of demanded record (FF/FB and UP/DWN)
32 — Buttons of a choice of a disk
33 — the Indicator of number of a disk
34 — the Indicator of a mode of listening of records from changer CD

35 — the Indicator of number of shop
36 — the Indicator of blocking of shop
37 — Number of a reproduced path
38 — reproduction Time
39 — the repetition Indicator / a casual order of reproduction
40 — the Indicator of inclusion of a casual order of reproduction (RDM)
41 — the Indicator of repetition of reproduction of a current path (RPT)


Reproduction start

To start reproduction press the button of CD CH/MAG (27) audiosystem control panels twice, - on the display screen will be highlighted the indicator of use of CD-changer (34) and the indicator of number of a disk.

If CD-changer is connected to system with two (12 disks) or three (18 disks) shops, will light up also the indicator shop number.

Pressing the button (27) in a radio receiver operating time leads to automatic switching-off of the last and system transition in a mode of reproduction of records with filled in shop of CD-changer of compact discs. Upon termination of record of one disk the system is switched to reproduction next of filled in changer shop, - the blank disk drives are passed.

At use of a changer with two and three shops of the logician of transition remains taking into account switching of shops.

Shop choice (changers with two or three shops)

The shop choice is carried out by short-term нажимания on the button of CD CH/MAG (27), - watch switching of indicators on the display screen.

Choice of a compact disc subject to reproduction

The choice of a compact disc subject to reproduction is carried out by means of the buttons (32) located in the left part of the control panel of an audiosystem.

On changers with two or three shops it is necessary to make preliminary blocking of shop by keeping of the button (27) pressed during not less than 2 seconds, - from both parties of the indicator (34) square brackets of the indicator of blocking of shop (36) should light up, besides, on the display the indicator of number of corresponding shop (35) should start to blink. Transition to following shop after the termination of last record is not made!


Reproduction of the contained chosen compact disc

Reproduction always begins with the first path of the chosen disk.

The choice of a path of a listened disk subject to reproduction can be made by means of handles (31).

Transition from current (executed) to a path to subsequent/previous is carried out by short-term turn of the handle in a corresponding direction. Keeping of the handle turned within more than 2 seconds leads to consecutive search of paths in the chosen direction. The choice proves to be true display indications on which screen number of a corresponding path is highlighted. For the search termination release the handle, - reproduction will begin automatically.

Return to reproduction of the first path of the chosen disk

Return to reproduction of the first path of the chosen disk can be made a way нажимания on corresponding of the numbered buttons (32).

Repetition of reproduction of a current path

For return to the beginning of reproduction of a current path press button RPT (29) audiosystem control panels, - on the display the indicator (41) will be highlighted and the system will pass to playing of the chosen path in a continuous cyclic mode. Mode switching-off is made by repeated pressing of button RPT.

Return to the beginning of a current path can be made also by means of handles (32).


Repetition of reproduction of a current disk

For realisation of repetition of reproduction of a current disk press button RPT and keep its pressed during not less than 2 seconds, - on the screen of the display besides the indicator (41) the indicator (39) will be highlighted also. Mode removal is made in a similar manner.

Installation of a mode of a casual order of reproduction of paths

At will of the user the mode of a casual order of reproduction of paths of a listened compact disc can be chosen.

Mode inclusion is made by means of button RDM (28), - on the display screen the corresponding indicator (40) will be highlighted and the system will be switched to reproduction of the paths written down on a disk in a casual order.

For mode removal press button RDM once again.

The player design allows to carry out also listening in any order of paths of all disks of the chosen shops. For activation of the given function it is necessary to press button RDM and to keep its pressed during not less than 2 seconds, - on the display screen indicators (39) and (40) will be highlighted. Mode removal is made in a similar manner.

Switching of modes of functioning of the display

Switching of modes of functioning of the display is made by means of button DISP (30) and carried out in a following order: path Number - reproduction Time - Hours.

Reproduction stop

The stop of functioning of CD-changer can be made by audiosystem transfer in a mode of a radio receiver or listening of a magnetic recording by means of buttons FM/AM or TAPE, or by food deenergizing.

Rules of the reference with compact discs

See above.

Sun-protection peaks

Sun-protection peaks provide protection of eyes of the driver / the forward passenger from blinding by direct solar beams both in front, and sideways.

In a sun-protection peak the toilet pocket mirror equipped with a folding cover is built in addition in.


Salon illumination

Main салонный the fixture

The fixture is located in a forward part of the ceiling arch of the car and equipped three-position ползунковым by the switch. The switch allows to make illumination switching-off, its inclusion in a constant mode, and also to activate a mode of operation of the fixture at opening of doors.


Fixtures of the directed illumination (mate lamps)

Two, directed fixture united in the general case are established in a forward part of the ceiling panel and are equipped by the push-button switch.


Luggage space illumination

Luggage space illumination



1 — It is included
2 — It is switched off
3 — Activation from door gauges-switches

 

One more fixture is established in a car luggage space. The fixture is equipped three-position ползунковым by the switch, allowing to choose one of three modes of illumination.

Cigar Lighter

Cigar Lighter it is built in in the panel of facing of a forward ashtray (see more low) the central section of furnish of the panel of devices and functions only at the included ignition (a key in position ON or АСС).

For activation прикуривателя simply drown its button in a reception nest against the stop, - after warming up of a heating element the button will automatically jump out in a starting position.

At all do not keep the button прикуривателя in the pressed position by force! If the button прикуривателя after pressing does not jump out after more than 30 seconds, the car should be driven away on a car repair shop for elimination of taking place malfunction. After use do not forget to return the button in a nest (in order to avoid a contamination of the last).

The reception nest прикуривателя can be used for connection of external consumers of the electric power (the pump, зарядное the device for a radio telephone, a vacuum cleaner), calculated on a food in 12 In and with capacity of consumption no more than 120 Vt.

Ashtrays

Forward ashtray

The forward ashtray is built in in the central (console) section of furnish of the panel of devices. For ashtray opening pull it on itself.

To take an ashtray for procleaning extend it outside against the stop, then wring out a lock uvula and liberate from a reception niche.

Back ashtrays

The back ashtray is built in in the panel of furnish of back doors of the car. For ashtray extraction extend it against the stop, wring out a lock uvula and liberate from a reception niche.

Digital watch

Hours are built in in the ceiling console of the car and function only at the included ignition (a key in positions ON or АСС).

Installation of indications of hours is made by means of adjustment buttons: Н = installation of hours, M = installation of minutes, SET = dump of indications of minutes on a zero.

Brightness of indication of hours can decrease at inclusion of devices of external illumination. On some models possibility of restoration of adequate brightness by means of button BRIGHT is provided.


Ware boxes

On cars of considered models following ware boxes are provided:
  • The main ware box
  • Box on the central console
  • Branch for sun glasses
  • Pocket in the panel of devices
  • Монетница
  • Door pockets
  • The main ware box

    The main ware box is located on the right under the panel of devices of the car and equipped by the lock.

    For box opening pull upwards the handle of its lock. In a box illumination is provided automatically joining at opening of a door.

    Watch, that during movement the cover of a ware box has been densely closed.

    Box on the central console

    In a back part of the central console one more ware box, in the closed condition carrying out also an armrest role is provided. For cover opening simply pull its first line upwards.


    Branch for storage of sun glasses

    The branch equipped with a folding cover for storage of sun glasses is provided in the ceiling console of the car.

    In hot weather under the influence of direct solar beams the car roof can strongly be warmed up, in view of what, leaving the car not to parking, it is necessary to take plastic subjects from ceiling branch.


    Pocket of the panel of devices

    In the central part of the panel of devices, it is direct over lattices дефлекторов air lines the ware pocket intended for storage of documents and small subjects is located by the equipped folding cover. For opening of a cover of a box press the button of a clamp of its latch.


    Door pockets

    Door pockets are built in in armrests and equipped by folding covers. For cover opening press the clamp button замковой latches.


    Монетница

    Монетница it is equipped in the panel of devices of the car. For opening монетницы pull for an upper edge of its cover.


    Coasters

    Coasters in the panel of devices

    The sliding panel with two coasters is equipped in the central part of the panel of devices directly under дефлекторами air lines. For panel extraction pull it for a first line.

    Coasters in the central console

    In a back part of the central console of the car it is provided two more complete sets of coasters.

    One coaster is built in in a cover of a console ware box and equipped сдвижной by a cover.

    Two more coasters are equipped in a back wall of the central console and taken by opening of a folding cover.


    The luggage space equipment

    Power supplies socket

    Power supplies socket is located on the right wall of a luggage space, is direct behind an arch of a back wheel and is equipped сдвижной by a cover. The socket is intended for connection of external consumers of the electric power (the pump, зарядное the device for a radio telephone, a vacuum cleaner), calculated on a food in 12 In and with capacity of consumption no more than 120 Vt.

    Top шторка a luggage space

    Do not put on шторку a luggage space heavy subjects.

    Pull for edge fastening on springs шторки and fix hooks of last in special clamps.

    After removal of fixing hooks with скоб clamps шторка will automatically return to the cleaned position.

    Removal шторки is made by simple приподнимания its edges.

    Скобы and hooks for cargo fastening

    On a floor and on lateral walls of a luggage space are provided скобы for cargo fastening. The most reliable way of fixing of luggage is its pressing to a floor of a luggage space by means of a special grid.

    Besides скоб on luggage space walls hooks for крепя the bags equipped with straps are usually provided.

    Niches

    In the panel of a floor of a luggage space some niches intended for storage of a spare wheel, tools, and other stock are organised. Niches are equipped by four folding covers.

    Folding covers of small niches are located with forward and lateral edges of a floor of a luggage space

    Opening and fixing of a cover of the central niche intended for storage запаски


    The central cover closes a niche under storage of a spare wheel and is equipped by a special hook for its fixing in the lifted position.