Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
- Systems of cooling, heating
Specifications
Antifreeze - the general data
Check of serviceability of functioning and thermostat replacement
Removal and installation of the fan of system of cooling
Service, removal and installation of a radiator of system of cooling
Removal and installation of a filling tank (model with a turbo-supercharging)
Removal, check and installation of the water pump
System of heating and salon ventilation - the general information
Removal and heater installation
Removal and installation of the fan of a heater
Check of serviceability of functioning and service of systems of heating and air conditioning
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
Specifications
The general parametres| Volume of a cooling liquid, l | |
| Engines | 2.0 l |
| Models with РКПП | 6.4 |
| Models with АТ | 6.3 |
| Engines of 2.5 l | 6.2 |
The water pump
| Type | The centrifugal |
| The rashodno-pressure head characteristic (at temperature of a cooling liquid 80°С) | |
| At engine turns | 760 in a minute |
| 20 l/mines | 0.3 m of waters. The item |
| 100 l/mines | 5 m of waters. The item |
| 200 l/mines | 23 m of waters. The item |
| Diameter крыльчатки, mm | 76 |
| Quantity of shovels | 8 |
| Diameter of a shaft, mm | 60 |
| Backlash size between крыльчаткой and the case, mm | |
| Rating value | 0.5 ÷ 0.7 |
| Limiting admissible value | 1.0 |
| Limiting admissible size axial люфта, mm | 0.5 |
The thermostat
| Type | Воскозаполненный |
| Temperature of the beginning of opening, °С | 76 ÷ 80 |
| Temperature of full opening | 91 |
| Size of a raising of the valve, mm | 9.0 |
| Diameter of the valve, mm | 35 |
The fan
| Capacity of the electric motor, Vt | |
| Models without a turbo-supercharging | 120 |
| Models with a turbo-supercharging | 140 |
| Diameter крыльчатки, mm | 340 |
Radiator
| Pressure of opening of the paro-air valve, кПа | |
| The superfluous | 88 ± 10 |
| Depth of depression | - 4.9 ÷ - 9.8 |
Broad tank
| Volume, l | 0.6 |
Deflection drivers belts, mm
| In the middle of length of a belt under effort 98 Н (10 кгс) | |
| The wheel generator/hydraulic booster | |
| New belt | 7.0 – 9.0 |
| Old belt | 9.0 – 11.0 |
| Compressor KV | |
| New belt | 7.5 – 8.5 |
| Old belt | 9.0 – 10.0 |
| Pressure of the valve of a cover of a radiator, bar | |
| Models with engines EJ20J | 0.8-1.0 |
| Models with engines EJ20J | 0.8-1.0 |
| Temperature of opening of the thermostat | 76-80°С |
| Resistance of the gauge of temperature Cooler |
350-400 Ohm, at 80°С |
Efforts of a tightening of carving connections, Nanometer
Are resulted also in the text of the Head and on accompanying illustrations.
| Pulley коленвала | 122-137 |