Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
- Systems of cooling, heating
   Specifications
   Antifreeze - the general data
   Check of serviceability of functioning and thermostat replacement
   Removal and installation of the fan of system of cooling
   Service, removal and installation of a radiator of system of cooling
   Removal and installation of a filling tank (model with a turbo-supercharging)
   Removal, check and installation of the water pump
   System of heating and salon ventilation - the general information
   Removal and heater installation
   Removal and installation of the fan of a heater
   Check of serviceability of functioning and service of systems of heating and air conditioning
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
3df4be34


Service, removal and installation of a radiator of system of cooling

Do not start performance of procedures before full cooling of the engine. Preventions in the beginning see also Has undressed Antifreeze - the general data.


Service without removal

On models with a turbo-supercharging check is made on a mouth of a filling tank.


 PERFORMANCE ORDER

1. Muffle the engine, carefully wipe all joints subject to check and connections.
2. Uncover a jellied mouth of a radiator, in case of need add in a radiator cooling liquid for lifting of level of last mouth to the bottom cut.
3. Connect to a jellied mouth the special adaptation for check of a radiator and create in the last pressure in 157 кПа. Check up assemblage of a radiator and it штуцерные connections on presence of signs of leaks of a liquid. Examine also about development of leaks радиаторные hoses.


Removal

Details of installation of a radiator and accompanying components on models without a turbo-supercharging

1  — the  Casing of the fan of system of cooling
2  —  Assemblage of the fan of system of cooling (крыльчатка with the electric motor)
3  — the  Cover of a broad tank
4  —  Perelivnoj a hose
5  — the  Arm
6  — the  Broad tank
7  —  Collars
8  —  Top радиаторный a hose
9  —  Bottom радиаторный a hose
10  — a  radiator Arm
11  — the  Pillow of the top support

12  — the  Stopper for air release
13  — the  Radiator
14  — the  Pillow of the bottom support
15  — the  Radiator
16  — the  Bringing line () cooler ATF
17  — the  Taking away line of cooler ATF
18  — the  Collar
19  —  Lines of a path of cooling ATF
20  — the  Bringing line () coolings ATF
21  — the  Taking away line () cooler ATF


Details of installation of a radiator and accompanying components on models with a turbo-supercharging

1  — the  Casing of the fan of system of cooling
2  —  Assemblage of the basic fan of system of cooling (крыльчатка with the electric motor)
3  — the  Hose to a filling tank
4  — the  Drainage tube
5  — the  Cover of a broad tank
6  — the  Arm
7  —  Perelivnoj a hose ()
8  — the  Broad tank
9  —  Drain краник
10  —  Consolidation
11  — the  Drain gate

12  — the  Drain tube
13  — the  Collar
14  —  Bottom радиаторный a hose
15  —  Top радиаторный a hose
16  — the  Pillow of the top support
17  — a  radiator Arm
18  — the  Radiator
19  — the  Pillow of the bottom support


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Empty cooling system (Routine maintenance see the Head). If replacement of a cooling liquid was made recently, keep it for the further use (the prevention in Section Antifreeze - the general data see).
3. Disconnect top and bottom радиаторные hoses from the engine.
4. Uncover a belt.
5. On models without a turbo-supercharging disconnect a broad tank and переливной a hose.
6. On models with a turbo-supercharging disconnect from a radiator a hose going to a filling tank.
7. Disconnect electroconducting from the basic and auxiliary fans.
8. Disconnect arms of fastening of a radiator.
9. Having raised a radiator, slightly shift it to the left.
10. Disconnect bringing and taking away lines of cooling ATF. Merge in the prepared capacity a working liquid.
11. Lift a radiator upwards and take it from an impellent compartment of the car.

Installation

 PERFORMANCE ORDER

1. Put on rubber pillows of support fingers in the bottom part радиаторной assemblages.
2. Fill pillows in nests on the forward panel and establish a radiator.
3. Establish arms of fastening of a radiator. Screw and strongly tighten fixing bolts.
4. Connect electroconducting to the basic and auxiliary radiators.
5. Connect top and bottom радиаторный hoses.
6. Establish a broad tank and переливной a hose.
7. Establish a belt.
8. Connect a negative wire to the battery.
9. Fill in in system cooling liquid.

On models with a turbo-supercharging the cooling liquid is filled in in a filling tank.

10. Achieve a raising of level of a cooling liquid to the top mark in a wall of a broad tank.
11. Establish a cover of a jellied mouth of a radiator and a stopper for air release.
12. Warm up the engine to normal working temperature, having allowed to it to work within 5 minutes at turns from 2000 to 3000 in a minute.
13. Muffle the engine and wait, while the temperature of a cooling liquid will decrease to safe value.
14. Remove a stopper and a cover of a jellied mouth of a radiator.
15. If liquid level in a radiator has decreased, add it to the bottom cut of a mouth.
16. Check up liquid level in a broad tank, in case of need make corresponding updating.
17. Establish a stopper and a cover of a jellied mouth.