Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
- Coupling, трансмиссионная a line
   Specifications
   Coupling - the general information and check of a condition of components
   Removal, check of a condition of components and installation of the main cylinder of coupling
   Removal and installation of the executive cylinder of coupling
   Removal of air from a hydraulic path of a drive of deenergizing of coupling
   Forward power shafts - the general information
   Removal, service and installation of forward power shafts
   Removal and installation of assemblage of a rotary fist, service ступичной assemblages
   Back power shafts - the general information
   Removal, service and installation of back power shafts
   Removal, service and installation of a back nave
   Back differential - the general information
   Removal and installation карданного a shaft
   Removal and installation of a flange of a leading gear wheel of differential and epiploon
   Removal and installation of back differential
   Differential major repairs
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
3df4be34


Removal and installation of back differential

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Make sure that the gear change box is translated in neutral position.
3. Поддомкратьте the car also establish it on props.
4. Remove back wheels.
5. Remove back section of system of release of the fulfilled gases in a pine forest with the muffler (see the Head of the Power supply system and release).
6. A metal thermofilter of forward section of system of release (see the Head of the Power supply system and release).
7. Uncover a forward support of differential.
8. Remove карданный a shaft (see Has undressed Removal and installation карданного a shaft).
9. Remove a thermofilter of system of release of the fulfilled gases.
10. Отболтите basic arms of a cable of a drive of a lay brake.
11. On T-type differentials liberate from assemblage power shafts by means of a special stripper (28099РА100), - on VA-type differentials take advantage for the same purpose of mount.
12. Tie up the power shafts liberated from differential a wire to suspension bracket elements, - do not suppose повисания all of them in weight on external SHRUS.
13. Remove the bottom basic arm of differential.
14. Prop up differential assemblage тележечным a jack.
15. Отболтите differential from a beam.
16. Отболтите a forward part of differential from a stretcher.
17. Ask the assistant to adhere a stretcher and slowly lower differential.
18. Shift differential forward before liberation of hairpins from a beam and take assemblage from under the car.


Installation is made upside-down. Track, that all fixture has been tightened with demanded effort.