Subaru Forester

1997-2005 of release

Repair and car operation

Specifications

Ignition system

Type	Direct ignition Map-DIS (as a control system part And распрделенного injection MPFI)
Ignition order	1-3-2-4
Base corner of an advancing of ignition, hailstones before ВМТ, (it is not regulated, set by the management block)
Models without турбокомрессора	1010, at 650 rpm (at 670 rpm on models with АТ)
Models with турбокомпрессором	1210, at 700 rpm

The scheme of an arrangement of cylinders

Ignition coils

Type
Models without turbo-supercharging Hitachi	СМ12-100
Models with turbo-supercharging Diamond	F569-01R
Resistance of windings of coils of ignition, Ohm
Primary windings (between plugs 1 both 2; and 2 and 3)
Hitachi СМ12-100	0.63 0.77
Diamond F569-01R	0.62 0.76
Secondary windings (between plugs And both In; and With and D)
Hitachi СМ12-100	10400 156000
Diamond F569-01R	18900 24150
Resistance between the primary plug and the case of bobbin assemblage, МОм	Not less than 10

Spark plugs and ВВ electroconducting

Type of spark plugs
Engines of 2.0 l
Models without a turbo-supercharging
The models equipped catalytic The converter	Champion RC10YC4 (An interelectrode backlash 1.0 1.1 mm)/RC9YCC, (a backlash of 0.8 mm)
Models without каталитического the converter
NGK	BKR6E-11 (A backlash of 0.8 mm)
Autolite:	APP3923, (a backlash of 1.0 mm)
Bosch:	FR8DCX, (a backlash of 1.1 mm)
Beru:	UXF79, (a backlash of 1.1 mm)
Models with a turbo-supercharging	NGK PFR6B (A backlash 0.7 0.8 mm)
Champion	RC 8PYP (a backlash of 0.8 mm)
Engines of 2.5 l
Models without a turbo-supercharging	RC10YP4A (Champion)
Models with a turbo-supercharging	PFR5B-11 (NGK)
Resistance of candle wires, clod
Candles of 1st and 3rd cylinders	6.43 15.01
Candles of 2nd and 4th cylinders	6.67 15.57

Charge system. The generator

Type	Mitsubishi А2Т09591 with built in Pressure regulator
Polarity of grounding	"  -"
Pressure and return current	12В/75А
Anchor type	3 phases, windings are connected by a star
Straightening	Full, on 8 diodes
Frequency of rotation at 13.5В and 20С, rpm	700
Return current, And
At turns of the engine 1500 in mines	35
At turns of the engine 2500 in mines	64 (14)
At turns of the engine 5000 in mines	77
Diameter of a contact ring of the generator, mm
Rating value	22.7
Limiting admissible value	22.1

Start system. A starter

Starters Nippondenso

Type	128000-8311 or 129000-8321, with a reducer
Pressure () / capacity (kw)
128000-8311	12/1.0
128000-8321	12/1.4
Rotation direction	Counter-clockwise
Quantity of teeths of a gear wheel
128000-8311	9
128000-8321	9
Check of a starter without loading
Pressure/current (max), В/А	11/90
Frequency of rotation, rpm
Model 128000-8311	3000
Model 128000-8321	2900
Starter check under loading
The recommended method
Model 128000-8311
Pressure () / a twisting moment (Nanometer)	8/10
Current () / frequency of rotation
(Rpm)	280 (max)/900
Model 128000-8321
Pressure () / a twisting moment (Nanometer)	8/14
Current () / frequency of rotation
(Rpm)	370 (max)/880
Alternative method with applying of the brake moment (rating values)
Model 128000-8311
Pressure () / a current ()	5/800 (max)
The braking moment (Nanometer)	27
Model 128000-8321
Pressure () / a current ()	5/1050 (max)
The braking moment (Nanometer)	27
External diameter of a collector of anchor assemblage, mm
Rating value	30
Limiting admissible value	29
Radial palpation of a collector of anchor assemblage, mm
Rating value	0.02
Limiting admissible value	0.05
Depth подрезки isolation between ламелями a collector, mm
Rating value	0.6
Limiting admissible value	0.2
Length of coal brushes, mm
Rating value	15
Limiting admissible value	10

Starters Mitsubishi

Type	MIT70381A, MIT75681 or MIT77181, With a reducer
Pressure () / capacity (kw)
MIT70381A And MIT77181	12/1.0
MIT75681	12/1.4
Rotation direction	Counter-clockwise
Quantity of teeths of a gear wheel
MIT70381A And MIT77181	8
MIT75681	9
Backlash size between the case and a leading gear wheel, mm	0.5 2.0
Check of a starter without loading
Pressure/current (max), В/А	11/90
Frequency of rotation (all models), rpm	3000
Starter check under loading
The recommended method
Models MIT70381A and MIT77181
Pressure () / a twisting moment (Nanometer)	8/8.5
Current () / frequency of rotation
(Rpm)	280 (max)/980
Model MIT75681
Pressure () / a twisting moment (НЧм)	7.7/10
Current () / frequency of rotation
(Rpm)	300 (max)/1000
Alternative method with applying of the brake moment (rating values)
Models MIT70381A and MIT77181
Pressure () / a current ()	4/780 (max)
The braking moment (Nanometer)	18
Model MIT75681
Pressure () / a current ()	4/980 (max)
The braking moment (Nanometer)	27
Radial palpation of a collector of anchor assemblage, mm
Rating value	0.05
Limiting admissible value	0.10
Depth подрезки isolation between ламелями a collector, mm	0.5 0.8
Length of coal brushes, mm
Rating value	17.5
Limiting admissible value	12.0
The effort developed щеточными by springs, Н
Models MIT70381A and MIT77181
Rating value (new brush)	20.6
The minimum admissible value	6.9
Models MIT75681
Rating value (new brush)	24.5
The minimum admissible value	9.32

Efforts of a tightening of carving connections, Nanometer

Are resulted also in the text of the Head and on illustrations

Spark plugs	21
Ljambda-probe
Models without турбокомпрессора	18-24
Models with турбокомпрессором	41-47
The detonation gauge
Models without турбокомпрессора	21-26
Models with турбокомпрессором	6