Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
- Engine electric equipment
   Specifications
   Start of the engine from the auxiliary power supply
   Removal and installation of the storage battery
   Check of a condition and replacement of wires of the battery
   Ignition system - the general information and safety measures
   Check of serviceability of functioning of system of ignition
   Assemblage of coils of ignition - the general information, check of a condition and replacement
   Check and adjustment of installation of a corner of an advancing of ignition
   Replacement of the module of ignition
   Check of serviceability of functioning of gauges CKP, CMP and detonations
   Service of spark plugs
   Check of a condition of high-voltage wires
   Charge system - the general information and safety measures
   The generator, the general information, check and service
   Removal and generator installation
   Start system - the general information and safety measures
   Check of serviceability of functioning of a starter and start chain
   Starters Nippondenso - check and service
   Starters Mitsubishi - check and service
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Утепление дома, технология устройства теплоизоляции скатной кровли
3df4be34

Replacement of the module of ignition

 PERFORMANCE ORDER

1. In systems of direct ignition used on considered models the module of ignition single искрообразования, providing simultaneous breakdown interelectrode backlashes of spark plugs at once two cylinders (in positions of the ends of a step of compression and release of pistons) is used. On signal ECM the ignition module develops a command on operation of the coil of the ignition providing simultaneous искрообразование at once in two cylinders of the engine (1 and 2, or 3 and 4 accordingly).
2. Remove the delivery chamber of an air path (see Has undressed the Regulator of pressure of fuel - the general data of the Head of the Power supply system and release.
3. Disconnect from the module of ignition electroconducting.
4. Turn out fixing screws and remove the module of ignition with кузовного an element.

Installation is made upside-down.