Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
- Brake system
Specifications
System of antiblocking of brakes (ABS) - the general information and diagnostic checks
Removal and installation of basic components ABS
Check and adjustment of height of position and free wheeling of a pedal of a foot brake
Adjustment of a rod of pusher gtts / of the VACUUM amplifier of brakes
Check and adjustment of a drive of a lay brake
Check of serviceability of functioning of the vacuum amplifier of brakes
Replacement brake колодок disk brake mechanisms
Removal and installation of supports of disk brake mechanisms
Condition check, removal and installation of a brake disk
Replacement of boots and service of drum-type brake mechanisms of back wheels
Removal and installation of components of assemblage of a lay brake (model with disk brake mechanisms of back wheels)
Removal and installation of the main brake cylinder
Check of a condition and replacement of brake lines and hoses
Removal and installation of assemblage of the vacuum amplifier of brakes
Prorolling of brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Specifications
The general parametres
| Type and volume of a brake liquid |
|
| Nominal height of position of a pedal of a foot brake, mm |
145.3 |
| Size of a free wheeling of a pedal of a foot brake, mm |
1.0 3.0 |
Disk brake mechanisms
| Thickness brake колодок (taking into account a metal substrate), mm |
| Forward wheels |
| Rating value |
17.0 |
| The minimum admissible value |
7.5 |
| Back wheels |
| The minimum admissible thickness brake колодок (taking into account a metal substrate), mm |
6.5 |
| Diameter of a brake disk, mm |
| Forward wheels |
277 |
| Back wheels |
266 |
| Limiting admissible size of cross-section palpation, mm |
| Forward disk |
0.075 |
| Back disk |
0.1 |
| Thickness of a disk, mm |
| Forward disk |
| Rating value |
24.0 |
| Limiting admissible value |
22.0 |
| Back disk |
| Rating value |
10.0 |
| Limiting admissible value |
8.5 |
| Diameter of the wheel cylinder, mm |
26.97 |
Lay brake of disk back brake mechanisms
| Diameter of a drum, mm |
| Rating value |
170.0 |
| Limiting admissible value |
171.0 |
| Course of the lever of a lay brake |
7-8 clicks |
Drum-type brake mechanisms
| Diameter of a drum, mm |
| Rating value |
229.0 |
| Limiting admissible value |
230.6 |
| Diameter of the wheel cylinder, mm |
19 |
| Maximum-permissible thickness of overlays of brake boots, mm |
1.5 |
ABS
| Size of an air backlash between the wheel gauge and teeths of its alarm rotor, mm |
| Gauges of forward wheels |
0.9 1.4 |
| Gauges of back wheels |
0.8 1.2 |
| The maximum admissible size of palpation of an alarm rotor/stupichnoj of assemblage, mm |
0.05 |
Efforts of a tightening of carving connections, Nanometer
| Size of an air backlash between the wheel gauge and teeths of its alarm rotor, mm |
| Bolts of fastening of a brake board |
46 58 |
| Nut of fastening of the vacuum amplifier of brakes |
12 23 |
Nakidnaja nut штуцерного connections
Fastenings of a brake line to a support |
14 18 |
| Nakidnaja nut штуцерного connections of fastening of a brake line to the wheel cylinder |
14 18 |
| Directing finger of a support |
| Models with an one-cylinder support |
22 31 |
| Models with a two-cylinder support |
34 44 |
| Bolt of a directing finger |
31 41 |
| Bolt of fastening of a support to анкерной скобе |
39 |
| Nut of fastening ГТЦ |
10 18 |
| Bolts of fastening of a cable of a drive of a lay brake |
23 37 |
| Bolts of fastening of the valve-terminator |
9 17 |
| Fastening bolts анкерной скобы to a nave |
| Lobbies |
78 |
| The back |
52 |
| Stupichnaja nut |
186 |
| Wheel nuts |
78 98 |
| Prorolling gates |
7.0 9.0 |
| Lock bolt ГТЦ |
1.4 2.7 |
| Counternut of the lever of a drive of a lay brake |
4.4 7.4 |
| Gauges ABS |
32 |
|
|
