Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
- Brake system
   Specifications
   System of antiblocking of brakes (ABS) - the general information and diagnostic checks
   Removal and installation of basic components ABS
   Check and adjustment of height of position and free wheeling of a pedal of a foot brake
   Adjustment of a rod of pusher gtts / of the VACUUM amplifier of brakes
   Check and adjustment of a drive of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Replacement brake колодок disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Replacement of boots and service of drum-type brake mechanisms of back wheels
   Removal and installation of components of assemblage of a lay brake (model with disk brake mechanisms of back wheels)
   Removal and installation of the main brake cylinder
   Check of a condition and replacement of brake lines and hoses
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Prorolling of brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Дискинезия
3df4be34

Removal and installation of components of assemblage of a lay brake (model with disk brake mechanisms of back wheels)

Removal

Design of disk brake mechanisms of back wheels

1  — the  Support
2  — the  prorolling Gate
3  — the  Directing finger (green)
4  — the  Protective cover
5  — the  Sealing cuff
6  — the  Piston
7  —  Pylnik
8  — the  Lock ring
9  — the  Blocking finger (yellow)
10  —  Ankernaja скоба
11  —  Spring clamps колодок
12  —  Internal колодка
13  —  External колодка
14  — the  Adjusting lining
15  —  Ankernyj a finger
16  —  Zaglushka
17  — the  Brake board

18  — the  Holder
19  — the  Spring washer
20  — the  Executive lever of a drive of a lay brake
21  — the  Back boot of a lay brake
22  — the  Forward boot of a lay brake
23  —  Razzhimnaja a lath
24  —  Razzhimnaja a spring
25  — the  Directing plate
26  — the  Returnable spring of a back boot
27  — the  Returnable spring of a forward boot
28  — the  Adjusting spring
29  — the  Regulator
30  — the  Plate of a directing spring
31  — the  Directing spring
32  — the  Brake disk


 PERFORMANCE ORDER

1. Remove assemblage of the disk brake mechanism with анкерной скобы and take her aside.
2. Having passed a screw-driver in a special aperture in a brake board (preliminary take заглушку) and rotating it a regulator cogwheel, ослабьте a clip of brake boots to drum walls. Remove a brake disk from a nave.
3. Disconnect returnable springs of boots. Remove directing spring and анкерный a finger of a forward boot.
4. Remove разжимную a lath and its spring.
5. Remove regulator assemblage.
6. Remove a boot.
7. Remove directing spring and анкерный a finger of a back boot.
8. Disconnect приводной a cable from the executive lever of a lay brake.
9. Remove from a boot the lever and its adjusting washers.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down.
2. In summary adjust a drive of a lay brake (the Section Check and adjustment of a drive of a lay brake see).