Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   System of additional safety (SRS) - the device and a functioning principle
   Removal and installation of components SRS
   Diagnostics of malfunctions SRS
   Control system of speed (темпостат) - the device and a functioning principle
   Adjustments of components темпостата
   Check of serviceability of functioning of components and problem diagnostics темпостата
   Removal and installation of components of a control system by speed
   Heating of back glass and rear-view mirrors - the general information, check of serviceability of functioning, regenerative repair
   Combination of devices - the general information, check of serviceability of functioning of components
   Removal and installation of a combination of devices
   The electric drive of rear-view mirrors - the general information, check of serviceability of functioning of components
   Removal and installation of components of the electric drive of rear-view mirrors
   The electric drive door Glass lifts - the general information, check of serviceability of functioning of components
   Removal and installation of regulators Glass lifts
   The uniform lock - the device and a functioning principle, diagnostics of malfunctions, check of a condition of components
   Removal and installation of activators of door-locks
   Switches of a steering column - the general information, check of serviceability of functioning
   Removal and installation of switches of a steering column
   Cleaners and washers of glasses - the general information, adjustment and check of a condition of components
   Removal and installation of components of cleaners/washers of glasses
   Replacement of lamps of lighting devices
   The radio receiver aerial - the general information
   Audiosystem - the general information
   + Schemes of electric connections - the general information


https://glamorlady.ru: как себя вести с трудным подростком
3df4be34

Replacement of lamps of lighting devices

Flasks of lamps remain hot within nearby 20 minutes after switching-off of lighting devices. Before to start to work make sure that components have definitively cooled down.


The list and performance data of lamps used in lighting devices накаливания is resulted in Specifications in the beginning of the present Chapter.

Head headlights

Replacement procedure of lamps of head headlights


 PERFORMANCE ORDER

1. Disconnect from a block headlight electroconducting and remove a rubber protective cover.
2. Take a cartridge. Liberate a lamp from a cartridge and establish on its place the new.

Try not to touch flasks галогенных lamps barehanded, - the fat stains left on a flask can be at the bottom of glass destruction at lamp heating.

3. Establish a cartridge in a block headlight.
4. Establish a rubber protective cover, - track correctness of an arrangement of marks.
5. Restore initial connection of electroconducting.

Antifog headlights (if are provided)

Removal of a protective cover of an antifog headlight


 PERFORMANCE ORDER

1. Release a clamp, and separate from assemblage of an antifog headlight the bottom part of a protective cover, uncover.
2. Turn out two fixing screws and remove an antifog headlight.
3. Disconnect from assemblage of a headlight electroconducting.
4. Having turned counter-clockwise, take from a headlight a cartridge with a lamp.
5. Replace a lamp.
6. Installation is made upside-down.

At installation to a protective cover at first plant on headlight assemblage its upper edge, then latch the bottom. Track reliability of fixing of a cover.


Forward indexes of turns

 PERFORMANCE ORDER

1. Turn out a screw-driver the screw of fastening of a lens of assemblage of the forward index of turn, - the screw is located in the top internal edges of assemblage.
2. Remove a lens, having liberated its back edge from the panel of a wing of the car.
3. Having turned counter-clockwise, liberate from assemblage of the index of turn a cartridge with a lamp.
4. Take a lamp from a cartridge and establish on its place the new.

Assemblage is made upside-down.

Forward dimensional fires

 PERFORMANCE ORDER

1. Having turned counter-clockwise, liberate from assemblage of a block headlight a cartridge with a lamp of forward dimensional fire.
2. Having pulled forward, take a lamp from a cartridge and establish on its place the new.

Installation is made upside-down.

Lateral repeaters of indexes of turns

 PERFORMANCE ORDER

1. Cautiously having pulled for a lens of the lateral repeater, shift it forward along a wing surface.
2. Having turned counter-clockwise, liberate from a socket a cartridge with a repeater lamp, take a lamp and replace its new.

Installation is made upside-down.

The back combined lantern

Stoplight, dimensional fire and the turn index

 PERFORMANCE ORDER

1. From a luggage space release clamps of fastening of a cover of access to assemblage of the back combined lantern.
2. Having turned counter-clockwise, liberate from ламподержателя lantern assemblage a cartridge of a lamp requiring replacement.
3. Having turned, liberate a lamp from a cartridge and establish on its place the new.

Assemblage is made upside-down, - track reliability of fixing of a cover.

Backing fire

 PERFORMANCE ORDER

1. Having wrung out a screw-driver, uncover lantern assemblage.
2. Having turned counter-clockwise, liberate a cartridge from the holder.  
3. Having pulled, take a lamp from a cartridge and establish on its place the new.

Assemblage is made upside-down.

Lantern of illumination of licence plate

 PERFORMANCE ORDER

1. Turn out screws of fastening of lantern assemblage.
2. Uncover also a lens.
3. Liberate a lamp from a cartridge and plant on its place the new.

Assemblage is made upside-down.

Foggy lanterns (if are provided)

 PERFORMANCE ORDER

1. Turn out fixing screws and remove a lens of a foggy lantern.
2. Having pressed and having turned counter-clockwise, liberate a lamp from a cartridge. Plant in a cartridge a new lamp.

Assemblage is made upside-down.

Salonnye fixtures

Main салонный the fixture and a lantern of illumination of a luggage space

 PERFORMANCE ORDER

1. Main салонный the fixture and a lantern of illumination of a luggage space have a similar design.
2. Accurately having hooked a screw-driver, remove a fixture plafond.
3. Liberate a two-socle lamp from spring contacts of cartridge assemblage.
4. Establish a new lamp.
5. Latch into place плафонную a lens.

The directed fixtures (mate lamps)

 PERFORMANCE ORDER

1. Turn out the fixing screw and remove плафонную assemblage of the directed fixtures.
2. Liberate the failed two-socle lamp from spring contacts of cartridge assemblage.
3. Establish a new lamp.
4. Establish плафонную assemblage and tighten the screw of its fastening.

Top level Stoplight

Replacement of a lamp of the forward index of turn


 PERFORMANCE ORDER

1. Having hooked a screw-driver, remove decorative covers of fixing screws, turn out screws and uncover a stoplight.
2. Having pressed and having turned counter-clockwise, liberate from a cartridge the failed lamp.
3. Establish a new lamp.
4. Establish a cover and fix its screws.
5. Establish decorative covers of screws.