Subaru Forester

1997-2005 of release

Repair and car operation

Specifications

Back suspension bracket

Limiting admissible size axial люфта naves, mm

0.05

Efforts of a tightening of carving connections, Nanometer

The characteristic	Value
Stupichnaja nut	186
Bolt of fastening of a brake board to the internal lever	46 ч 58
Bolts of fastening of a beam of a suspension bracket (stretcher) to the car bottom	107 ч 147
Nut of fastening of differential to a stretcher	56 ч 72
Fastening bolt карданного a shaft	24 ч 39
Bolt of fastening of an arm of the stabilizer of cross-section stability to the internal lever	18 ч 22
Counternut of a piston rod of a rack of a suspension bracket	49 ч 69
Bolts of fastening of a rack to ступичной to assemblage	186 ч 235
Bolts of fastening of a rack to кузовному to an element	14 ч 26
Adjusting bolt of the cross-section lever of a back suspension bracket	83 ч 113

Steering drive

Check of pressure head characteristics of the steering pump (the Section Check of the pressure head characteristic of the steering pump see)
Normal pressure (the gate is opened), кГс/см2	10
Pressure of dump (the gate is closed), кГс/см2	73 ч 79
Working pressure (the gate is opened), кГс/см2	73 ч 79
Limiting admissible size axial люфта Shaft of a leading gear wheel реечной transfers, mm	0.1
Limiting admissible size radial люфта a shaft of a leading gear wheel реечной transfers, mm	0.18
Limiting admissible size lateral люфта a shaft the helmsman рейки at effort applying in 98 Н (see Has undressed Major repairs of the steering mechanism) mm
The right end of a shaft	0.15
The left end of a shaft
In a horizontal plane	0.15
In a vertical plane	0.30
Nominal length of a steering column, mm	814 ч 817

Efforts of a tightening of carving connections, Nanometer

Bolts of fastening of a back cover of the steering pump	14 ч 18
Bolts of fastening of the final union of the steering pump	69 ч 79
Nut of fastening of a pulley of a drive of the steering pump	42 ч 62
Bolts of fastening of a basic arm of the steering pump to the engine	18 ч 24
Bolt of fastening of the steering pump to a basic arm	18 ч 23
Bolts of fastening of assemblage реечной transfers	47 ч 71
Bolt of fastening of the tank of the steering pump	18 ч 23
Koronchataja nut of a tip of steering draught	25 ч 29
Counternut of a tip of steering draught	78 ч 88
Fastening of steering bent for рейке the steering mechanism	69 ч 88
Bolts карданного the hinge of a steering shaft	21 ч 27
Fastening bolt клапанной assemblages	20 ч 30
Boats of fastening of a steering shaft	20 ч 29
Nut of fastening of a flange of a steering wheel	39 ч 49
Nut of fastening of a steering wheel	29 ч 39
Coupling bolts карданного the hinge	21 ч 26
Bolts of fastening of the module of a pillow of safety (with heads of type TORX)	8 ч 12
Bolts of fastening of assemblage combined подрулевых switches	2 ч 3
Bolts of fastening of a knee emphasis	2.4 ч 4.4
Bolts of fastening of the bottom section of a casing of a steering column	1.0 ч 1.4

Suspension bracket geometry

Height of a road gleam (the Section Adjustment of geometry of a suspension bracket see) mm
Redock	408 ч 444
Back	411 ч 447

Adjustment of wheels

Convergence
In front	0±1.5 mm (0°±9 ')
Behind	1.25±0.75 mm (0°8'±5 ')
Disorder
In front
Models without турбокомпрессора	-0°15'yo30'
Models with турбокомпрессором	-0°20'yo30'
Behind
Models without турбокомпрессора	-0°15'yo30'
Models with турбокомпрессором	-0°30'yo45'
Longitudinal inclination of an axis of turn of a wheel
Models without турбокомпрессора	2°35'
Models with турбокомпрессором	2°40'±45'
Cross-section inclination of an axis of turn of a wheel
Models without турбокомпрессора	13°25'
Models with турбокомпрессором	13°40'
The maximum angle of rotation of an internal wheel to turn	34°24'±1°30'
The maximum angle of rotation of an external wheel to turn	30°12'±1°30'

Adjustment of disorder of back and forward wheels