Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross-section beam of a forward suspension bracket
   Removal and installation of a rotary fist from the wheel bearing, service ступичной assemblages
   Removal and installation of the bottom lever of a forward suspension bracket from a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross-section beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Prorolling of a hydraulic path of a steering drive
   Adjustment люфта gearings реечной transfers
   Check of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Major repairs of the steering pump
   Major repairs of the steering mechanism
   Steering column, - the general information, safety measures
   Removal and installation of the module of a pillow of safety
   Removal and steering wheel installation
   Removal and installation of assemblage combined подрулевых switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Major repairs of a steering column
   Wheels and tyres - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment


3df4be34

Removal and installation of a steering column

Removal

Try not to subject a shaft of under abnormal condition developing steering column to shock and pressing loadings!

Design of a steering column

1  — the  Plug
2  — the  Steering shaft
3  —  Assemblage подрулевого the switch with a contact cable drum
4  — the  Casing
5  — the  Knee emphasis
6  — the  Steering wheel
7  — the  Module of a pillow of safety

 


 PERFORMANCE ORDER

1. Remove a steering wheel (see Has undressed Removal and steering wheel installation).
2. Turn out coupling bolts and remove карданный the hinge of a steering shaft.
3. Remove the bottom section of furnish of the panel of devices.
4. At a corresponding complete set remove a knee emphasis.
5. Disconnect electroconducting from the lock of ignition and assemblage combined подрулевых switches.
6. Turn out two devices of a bolt of fastening of a steering column located under the panel.
7. Having pulled upwards, liberate a steering shaft from an aperture in the panel of a floor and remove it from the car.


Installation

Installation is made in an order, the return to an order of dismantle of components. Track, that all fixture has been tightened with demanded effort.