Subaru Forester

1. Поддомкратьте the car also establish it on props.
2. Remove a corresponding forward wheel.
3. Liberate from a basic arm on a rack a brake hose.
4. At a corresponding complete set turn out a bolt of fastening of wheel gauge ABS.
5. Turn out fastening bolts to a rack of a rotary fist.
6. Having delayed a fist downwards, separate it from a rack.
7. Mark adjusting position of the top support of a rack concerning a wing mudguard.
8. Give fixing nuts and remove a rack from the car.

1. By means of the special tool compress a screw spring to its full branch from a saddle of the top plate.
2. Having blocked a plate of a spring by means of the special tool (927760000), release самоконтрящуюся a nut.
3. Make rack dismantling.

1. Estimate degree of deterioration of components of a rack, check up them on presence of signs of mechanical damages.
2. Define size of a deflection of a rod of the shock-absorber for what extend a rod against the stop outside and fix циферблатный a measuring instrument in 10 mm from its end. Delay a rod for the end with effort 1.8 кГс and measure size lateral люфта, - if the result of measurement exceeds limiting admissible value (0.80 mm), replace a rack.
3. Estimate smoothness and noiselessness of a course of the shock-absorber, in case of need replace a rack.

1. Assemblage is made in an order, the return to an order of dismantle of components, - do not forget to replace самоконтрящуюся a nut! Track, that the screw spring has been established by a flat end face upwards.
2. Installation is made in an order, the return to an order of removal of components. Track, that all fixture has been tightened with demanded effort.
3. In case of need make prorolling of brake system (the Brake system see the Head).