Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross-section beam of a forward suspension bracket
   Removal and installation of a rotary fist from the wheel bearing, service ступичной assemblages
   Removal and installation of the bottom lever of a forward suspension bracket from a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross-section beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Prorolling of a hydraulic path of a steering drive
   Adjustment люфта gearings реечной transfers
   Check of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Major repairs of the steering pump
   Major repairs of the steering mechanism
   Steering column, - the general information, safety measures
   Removal and installation of the module of a pillow of safety
   Removal and steering wheel installation
   Removal and installation of assemblage combined подрулевых switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Major repairs of a steering column
   Wheels and tyres - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment
3df4be34


Major repairs of the steering pump

Dismantling

Design of the steering pump

1  —  Shtutsernyj a socket
2  — the  Sealing ring
3  —  Zolotnikovyj the valve
4  — the  Spring
5  — the  Sealing ring
6  — the  Case
7  — the  Gauge-switch
8  — the  Shaft
9  — the  Epiploon

10  — the  Bearing
11  — the  Lock ring
12  — the  Pulley
13  — the  Back cover
14  — the  Directing pin
15  —  Ekstsentrikovoe a ring
16  —  Shibernye of a shovel
17  — the  Rotor
18  — the  Lateral plate


 PERFORMANCE ORDER

1. The steering pump has a design шиберного type.
2. Clamp pump assemblage in a vice with soft sponges.
3. Remove a back cover.
4. Remove a sealing lining, in case of need take directing pins.
5. Remove эксцентриковое a ring, take a rotor with шиберными shovels. Remove a lateral plate and wavy washers. Sealing rings will throw out, - at assemblage they are subject to replacement without fail.
6. Loosen the also remove the final union.
7. Remove the control valve with a spring.
8. Take from the pump case a lock ring.
9. Push out back from the case a pump shaft.
10. Remove an epiploon.
11. Carefully study a condition of all removed components. Make sure, hundred case of the pump on порежден.


Assemblage

 PERFORMANCE ORDER

1. Prepare replaceable epiploons, sealing and lock rings.
2. Before installation of components carefully wipe them with solvent application.
3. Before epiploon landing grease its sealing sponges, and also walls of the case of the pump консистентной with greasing.
4. Manufacturers recommend to make replacement of a shaft of the pump.
5. The further assemblage is made in an order, the return to an order of dismantle of components, track, that шиберные shovels have appeared are planted in rotor grooves by the rounded ends outside (to эксцентриковому to a ring).
6. Operating in a diagonal order, tighten bolts of fastening of a back cover of pump assemblage with demanded effort.
7. In summary check up smoothness of rotation of a shaft, estimate its size lateral люфта.