Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross-section beam of a forward suspension bracket
   Removal and installation of a rotary fist from the wheel bearing, service ступичной assemblages
   Removal and installation of the bottom lever of a forward suspension bracket from a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross-section beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Prorolling of a hydraulic path of a steering drive
   Adjustment люфта gearings реечной transfers
   Check of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Major repairs of the steering pump
   Major repairs of the steering mechanism
   Steering column, - the general information, safety measures
   Removal and installation of the module of a pillow of safety
   Removal and steering wheel installation
   Removal and installation of assemblage combined подрулевых switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Major repairs of a steering column
   Wheels and tyres - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment
3df4be34


Removal and installation of assemblage combined подрулевых switches

Removal

Design of a steering column

1  — the  Plug
2  — the  Steering shaft
3  —  Assemblage подрулевого the switch with a contact cable drum
4  — the  Casing
5  — the  Knee emphasis
6  — the  Steering wheel
7  — the  Module of a pillow of safety

 


 PERFORMANCE ORDER

1. Remove a steering wheel (see Has undressed Removal and steering wheel installation).
2. Remove the top and bottom sections of a casing of a steering column.
3. Turn out three fixing screws and remove assemblage of the combined switches from a steering column.


Installation

Centering of a contact cable drum of a steering column


 PERFORMANCE ORDER

1. Make sure that forward wheels are still developed in rectilinear position.
2. Make sure that levers подрулевых switches are translated in position "Vykl" (OFF).
3. Establish assemblage of switches on the regular place on a steering column.
4. Develop a spring cable drum against the stop counter-clockwise, then return it approximately on 2.65 a turn back (on the indicator there should be an inscription “CENTER”) and achieve combination aligning стрелочных labels.
6. The further installation is made in an order, the return to dismantle of components.
7. In summary do not forget to make activation SRS (the Onboard electric equipment see the Head) and make sure of serviceability of operation of a control lamp of pillows of safety.