Subaru Forester

1997-2005 of release

Repair and car operation



Subaru Forester
+ Cars Subaru Forester
+ The maintenance instruction
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear change box
+ Coupling, трансмиссионная a line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross-section beam of a forward suspension bracket
   Removal and installation of a rotary fist from the wheel bearing, service ступичной assemblages
   Removal and installation of the bottom lever of a forward suspension bracket from a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross-section beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Prorolling of a hydraulic path of a steering drive
   Adjustment люфта gearings реечной transfers
   Check of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Major repairs of the steering pump
   Major repairs of the steering mechanism
   Steering column, - the general information, safety measures
   Removal and installation of the module of a pillow of safety
   Removal and steering wheel installation
   Removal and installation of assemblage combined подрулевых switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Major repairs of a steering column
   Wheels and tyres - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment
3df4be34


Check of the pressure head characteristic of the steering pump

In order to avoid damage of pump assemblage do not keep the valve closed, or the pump of completely blocked during more than 5 seconds.

The connection scheme to a path of the steering pump of a manometre


 PERFORMANCE ORDER

1. By means of two transitive hoses (34099АС010 and 34099АС020) connect to a path of the steering pump a manometre (925711000), - the manometre joins in a path on a site between the pump and a pressure head line, from the pump party of the gate.
2. Start the engine on single turns and open the gate, - if the instrument read from a manometre differs from normal value (Specifications see) it is necessary to check up hydraulic lines on presence of signs of deformations, infringements of passableness and development of leaks.
3. Without suppressing the engine, close the gate. This time the manometre should register pressure of dump (Specifications see) - differently it is necessary to check up a safety valve condition. Besides, it makes sense to check up the pump on presence of signs of internal leaks and to estimate deterioration degree шиберных shovels.
4. At the engine working on single turns, by rotation of a steering wheel from an emphasis against the stop at the open gate, measure working pressure of the control valve. If the result of measurement does not correspond to requirements of Specifications, replace the control valve.